Just picked up a working Cougar BXM850 PSU.
Noticed that the main input cap is a Teapo LS (420V 560uf).
appears to be a date stamp on the cap of 09/19 - so is likely to be a bit over 4 years old.
any recommendations for which cap to use to replace this LS cap?
Teapo LS spec sheet shows 1600 mA ripple (30x50mm) for this cap. last time i changed a main input cap i used a Rubycon MXK
i am still looking this over and dont see any other signs of concern. but if someone knows this PSU and has any other recommendations for components to replace, let me know. (secondary caps all look ok but some are teapo. May replace them as well).
Noticed that the main input cap is a Teapo LS (420V 560uf).
appears to be a date stamp on the cap of 09/19 - so is likely to be a bit over 4 years old.
any recommendations for which cap to use to replace this LS cap?
Teapo LS spec sheet shows 1600 mA ripple (30x50mm) for this cap. last time i changed a main input cap i used a Rubycon MXK
i am still looking this over and dont see any other signs of concern. but if someone knows this PSU and has any other recommendations for components to replace, let me know. (secondary caps all look ok but some are teapo. May replace them as well).
Comment