Cosel ZUW25 2415

[JJ_]

I took this off a donor board. I am trying to see if the unit is functional. I tried giving it power 30V. applied to V+ and V-.

I could not get an output. I checked for output on V+ V- and combinations thereof with COM.

The board is potted. Does anybody know how to test these for functionality?

Here is the datasheet.

https://en.cosel.co.jp/product/power...W25/ZUW252415/

Thank you to all in advance who choose to help.

[прямо]

I took this off a donor board. I am trying to see if the unit is functional. I tried giving it power 30V. applied to V+ and V-.

I could not get an output. I checked for output on V+ V- and combinations thereof with COM.

The board is potted. Does anybody know how to test these for functionality?

Here is the datasheet.

https://en.cosel.co.jp/product/power...W25/ZUW252415/

Thank you to all in advance who choose to help.

It's a 24V to +/-15V DC converter, so why did you power it from a 30V source? You most likely killed it.

[lti]

It's rated for 18-36V, so 30V is fine.

There is a remote on/off pin that needs to be grounded to enable the output. Have you connected that pin?

[JJ_]

It's a 24V to +/-15V DC converter, so why did you power it from a 30V source? You most likely killed it.

Thank you for the response. The datasheet says you can go up to 36 V.

[JJ_]

It's rated for 18-36V, so 30V is fine.

There is a remote on/off pin that needs to be grounded to enable the output. Have you connected that pin?

Thank you for the response. I did ground it by connecting V- to the RC pin. I get absolutely nothing. Unless that's not how you ground it.