Sony AZ series HCR-AZ5D Power Issue

DjKrish

Badcaps Veteran

Join Date: Oct 2012

Posts: 354

Country: SG
#1

Sony AZ series HCR-AZ5D Power Issue

12-24-2013, 01:32 AM

Ok i have this set for sometime now and suddenly there's problem with power. The red standby light is working, but when u press it to on the unit, its like the set is on low battery. If u press the power button again, the light comes back to red standby. If u don't press the button back again, then the red light starts flashing. Is there a problem with the power supply? Less power supplied to the main board? Faulty power supply? Theres no display either. Only the power red light works. I thought it was cold solder joints, i re soldered everything, still same. TO check the power supply voltages, i dont have the diagram either Can anyone help pleaseeee.....
Tags: None

Previous template Next

Insignia NS-LCD019-09 issue: Power light turns blue for 3 seconds, the flashes red before going solid read again

by cajoeg

Hello, I'm new to the group and to trying to repair a LCD TV. During the past few years, I've been collecting/repairing/restoring vintage personal computers (Commodore, Apple II, Atari, TRS-80, Texas Instruments, and Timex Sinclair). This has been my retirement hobby. Now I've gotten interested in trying to repair a LCD TV that I have and used regularly when working on vintage computers.

The LCD I'm working on is a Insignia NS-LCD019. I've downloaded the service manual that I could find, but it must be a different revision since not too many items in the service manual match the TV...
- Channel: Troubleshooting TVs and Video Sources
02-10-2025, 04:01 PM
Sony 55X900E no standby light, no power. Replaced mainboard already

by noinimod

No standby red light, nothing
This Sony has a separate AC->DC power adapter supplying 19.5V to the TV power board (JK3)

Disconnected JK3 power board from main board, checked voltages on all the pin outs

At a few pins I can see the power supply providing 19.5V to the main board

Based on the service manual triage.. it seems to be pointing towards the power board (JK3) being the most possible culprit

LED light turns on when I disconnect LED driver board ribbon from mainboard (so i thought it is the mainboard,...
- Channel: Troubleshooting TVs and Video Sources
12-22-2021, 12:58 AM
Sony SLV-E780 Power Supply Issue – Clicking Sound, Need Help Identifying Faulty Component

by Akuanka

Hi everyone,

I'm troubleshooting a power supply issue with a Sony SLV-E780 VCR. The device clicks repeatedly but doesn't power up completely. I've already replaced five capacitors, but the problem persists.

Here's a video link https://photos.app.goo.gl/3Xki6yvCLn67gLX78 showcasing the sound. Based on your experience, could this be due to a transformer, diode, or another component? Any guidance on what to test or replace next would be greatly appreciated.

Thanks in advance for your help!
- Channel: Troubleshooting Power Supplies and Power Supply Design
11-23-2024, 01:12 PM
Acer Spin 1 SP111-33 Power-On Issue (Troubleshooting Assistance)

by justice171
I am seeking guidance on an Acer Spin 1 SP111-33 that does not turn on when pressing the power button.

Below are the observations and troubleshooting steps I have taken so far: Observations and Tests:
1. Verified that all critical voltages are present:
  - 3.3V and 5V are always present if DC is plugged.
  - 1.8V on the BIOS chip is present.
2. Checked the power button functionality:
  - When pressed, the voltage drops to 0V, indicating the button is functional.
3. Inspected the flex cable connecting the USB, audio, and power button to JUB1:
  - Confirmed connectivity is intact, ruling out issues
...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
11-26-2024, 12:39 AM
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?

by Tynan Dill

I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

Upon bringing it home and plugging it up, it showed a standby light.

I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

The screen seems to blackout and stay black, but with a flashlight I can see the display.

With my Playstation 4 connected via HDMI, and running a game I can hear sound.

Assuming...

7 Photos
- Channel: Troubleshooting TVs and Video Sources
11-22-2024, 01:46 PM
Loading...
No more items.

Sony AZ series HCR-AZ5D Power Issue

Sony AZ series HCR-AZ5D Power Issue

Related Topics