Can we do this with no pics?

[Ashroyer05]

My Hitachi would power on, the screen would come on then after 5 seconds or less the screen would go out and then the power LED would flash green repeatedly. I am trying to figure out if it is the main board or power supply causing the issue. I don't have a good camera right now for pics.

Steps taken:
1. Disconnected the sustain boards.
2. Measured voltages from psu to main
Pin 1. reads constant standby of 3.371V
Pin 6. On reads around 5.18V
Pin 6. off reads 0V

By off I mean when the screen goes out along with the sound of a relay.
Thanks for any input you may have.

[tom66]

Re: Can we do this with no pics?

How about a model number at least? Written on the rear of the set for example P42L01UA.

[Ashroyer05]

Re: Can we do this with no pics?

Cmp4121hdu

[Ashroyer05]

Re: Can we do this with no pics?

bump**

[Ashroyer05]

Re: Can we do this with no pics?

http://www.retrevo.com/pdf/352ci863/...CMP4121HDU-511
page (39)
by "flickering" I think they mean blinking which is what it does after the screen shuts back off. It did say it is in "power saver" mode when the display kicked on.

[Ashroyer05]

Re: Can we do this with no pics?

*page (23)* sorry

[Ashroyer05]

Re: Can we do this with no pics?

The clicking is coming from around those 2 big caps in the picture.