Newly pulled 2yo Antec Truepower 430W

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • willawake
    Super Modulator
    • Nov 2003
    • 8457
    • Greece
    #21
    Re: Newly pulled 2yo Antec Truepower 430W

    hahaha usually my stuff craps out when i fix someone elses.........especially the old servers get jealous when the new ones arrive and start crapping out.....
    capacitor lab yachtmati techmati

      Comment

      Previous 1 2 template Next

      Related Topics

      Collapse
      • rabbituk
        Antec TruePower 380p failed after intermittent supply, suspect MOV
        by rabbituk
        Hello,

        I have an Antec TruePower 380p PSU that I had repurposed from a Sonata case. It had been working fine on a server in the loft using the Wake-on-LAN feature regularly until a couple of recent power outages where the power became very unstable - going on/off very quickly. There is now no output whatsoever from the PSU & fan isn't working. There was a pop when I attempted to turn it on.

        Upon examination, it appears that voltage isn't getting very far so I believe the immediate issue is within the first stage. There is a green component that I am not familiar...
        12-01-2020, 03:26 AM
      • jshhh
        Help repairing Yamaha RM1X synthesizer/groovebox - PCB trace for capacitor has been pulled off
        by jshhh
        Hi guys,

        I've been trying to restore this Yamaha RM1X groove-box I bought, and the first thing on my agenda was to replace a bad capacitor that was making it so that the screen was super dim. As I'm a complete novice I went and accidentally pulled off one of the trace pads for the SMD capacitor as I was removing it, pulling up some of the green PCB with it. I've been trying to repair it by gluing down copper tape from where it began to pull off and solder the capacitor on after...atm I've just been attempting to do the same kind of thing on rubbish PCBs I got at a recycling place,...
        1 Photo
        03-26-2025, 07:05 PM
      • objecttothis
        EVGA 430W PSU Correct voltages but computer won't turn on
        by objecttothis
        I had a desktop form factor mini-server die on me a few weeks ago. Through my initial diagnostics, I was convinced it was the motherboard because when I shorted the Green wire on the ATX connecter, the multimeter gave me all the correct voltages on the various pins of the ATX connector and 5VSTB was also correct. To my surprise the replacement motherboard wouldn't turn on with the case power button either. I threw in another PSU and it turned on right away. This is an 80 Plus EVGA 430W PSU with PN:100-W1-0430. I pulled the cover off and don't see any immediately obvious blown caps or scorch...
        02-08-2025, 11:19 AM
      • Topcat
        Topcat's Supermicro X10DAI Build - Plus NVMe BIOS Mod Inside
        by Topcat
        Yes, I know I don't post this stuff much anymore....the only reason I'm posting this one is because of a NVMe adapter incompatibility; seems rather planned by Supermicro.....or I'm atleast a bit suspicious. It's plenty new enough to have a UEFI bios but a short 'happy list' of NVMe controllers that will work with this board, as if by some 'miracle', all Intel....so lets start at the beginning; we'll get back to this later.

        Of course the motherboard is as the thread title states; X10dai....but we'lre going to have some fun shoehorning this into a modern 'gamer case' that can actually...
        09-29-2024, 03:55 PM
      • sirpsychol
        Antec Earthwatts EA-380 smd element type/value
        by sirpsychol
        While recaping Antec Earthwatts EA-380 I've broke one side of unknown smd element, it have no print, it's flatter and darker than smd capacitors on this board, shaped more like resistor but it's not resistor ofc. Unfortunetly the printed description was under it and element was glued to the board so I cant read/tell the letter before element number too. Have anyone any idea what it is? Maybe is there any diagram of this PSU?

        ...
        09-03-2023, 07:58 PM
      • Loading...
      • No more items.
      Working...