PS does not work on heavy draw

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • abced123
    Member
    • Jul 2011
    • 10

    #1

    PS does not work on heavy draw

    Hi all,

    I have a generic ATX P S. Trying to jump start and reading all output 12V, 5V fine. However, when I plug it into a computer or LCD , it will stop working after few sec. Please advise .
  • c_hegge
    Badcaps Legend
    • Sep 2009
    • 5219
    • Australia

    #2
    Re: PS does not work on heavy draw

    Do you have any internal pictures of the PSU? What brand/model is it?
    I love putting bad caps and flat batteries in fire and watching them explode!!

    No wonder it doesn't work! You installed the jumper wires backwards

    Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

    Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

    Comment

    • Escort Eagle
      Senior Member
      • Jul 2012
      • 110
      • USA

      #3
      Re: PS does not work on heavy draw

      What is the IC Number in Controller Section ???

      Comment

      Related Topics

      Collapse

      Working...