http://www.hardwaresecrets.com/artic...ly-Review/1513
Seriously??? Giving a silver award to a unit with Asia'x caps???
Seriously??? Giving a silver award to a unit with Asia'x caps???
-
-
Re: Wtf???
read the comments on it. -
Re: Wtf???
I actually did, but was kinda unable to resist posting here.Comment
-
Re: Wtf???
Marketing money and reviews(ers) sometimes walk along the same path ....Comment
-
Re: Wtf???
I agree with the mark.
Caps aside, the power supply is very good for the money, certainly better than the half bridge designs we still get here (like the Premier power supplies).
Tight regulation, good efficient design (83% efficiency), bridge rectifier, good pcb with actual holes (routed out) for protection, few cables near the secondary caps so they may actually get some air from the fan on them...Comment
-
Re: Wtf???
I didn´t find the price for it. Have you found it somewhere ? How much does it cost ? Considering the site owner justifiy himself saying it is a budget PSU, it shouldn´t cost that much.Comment
-
Re: Wtf???
The AK500 was available in retail in 09/2011 at 50k won which was about 45$
This one shouldn't be more than 10$ more expensive and for a modular design, that's a good deal.Comment
-
Re: Wtf???
For about U$$ 50, even here in Brazil one could find something better. And at that price, it cannot be considered "budget", as the site owner says to defend himself.Comment
-
Re: Wtf???
Doesn't AsiaX=JunFu=Fuhjjyu?Comment
-
Re: Wtf???
That thing has terrible ripple. I wouldn't trust that thing with my desktop, let alone my server.Comment
-
I love putting bad caps and flat batteries in fire and watching them explode!!
No wonder it doesn't work! You installed the jumper wires backwards
Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium
Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 ProComment
-
Re: Wtf???
I understand that budget users don't want to pay much. But using craps is a TERRIBLE way to cut costs, and TBH I think it should be illegal to use crap caps. WHO cares about saving 50 cents on the caps when the potential consequences are the destruction of everything else in the system???
BTW: For anyone who is reading this and wondered what the link between Fuhjyyu and Jun Fu is, here's the file I posted earlier:Comment
-
Hello,
I have a really nice Atlantic Technology 642eSB subwoofer that I would love to get working. The problem is that the power appears ok (LED light is on), but there is no sound. I don't believe it to be the audio input board or anything wrong with the power as when in standby mode (LED = red), I can play a source and the LED turns green suggesting the input is being detected ok.
The amplifier is a common BASH design, my interpretation of the layout based on Picture #1:
- Top most hanging board is the audio input section. Note I accidentally broke the crossover... -
Hello all!
Recently I've got a broken Macbook Air M1 2020 A2337 of eBay with a broken screen and not turning on issue.
After some tinkering I've found C5201 capacitor to be blown. This is where I hit a wall since I am a total noob in this area and have no idea what else to look for. C5201 is on one line with 3 more capacitors which visually seem ok, but beep on continuity mode and also both sides of all capacitors beep when tested with ground from the board. This to me sounds like a short, but I am not able to find what component is before the capacitors to test it.... -
Hi all,
I had recently tried to reflash the bios on a dell latittude that has a Wson8 Chip however to no avail.
My question is, Has anyone had much success using the Pogo/Needle adapters to read and write bios without removing the chip from the main board?
I seem to struggling with the solder process wofh my reflow station and currently have 4 machines waiting for a bios mod/reflash.
For context I have just ordered a EZP2019 SPI flash so this is what I would be using alongside the Pogo Adapter.
Apologies if this is the wrong subcategory.... -
Hello,
I'm desperately trying to get my CH341A to work, but it seems that all my attempts have failed. Despite everything, I want to check that it works, the aim being to read at least one chip and “screenshot” the configuration for me to use as a reference.
Here are the steps (software part):
- I'm running Windows 11 Pro 64-bit (10.0 build 26100)
- Drivers are installed (no error messages) and there are no problems in the Device Manager.
- Set the language to English (to avoid the CH341A's basic software bug)
- Does not work on AsProgrammer... -
Hi
I'm working on a bare 820-2375-A board and I'm still noob if it comes to mac logic boards repair, but slowly getting there.
Board doesn't power up when magsafe is connected, green light on the charger, all G3H and S5 rails are present. I does turns on when I bridge SMC_ONOFF_L pads. Is this normal behaviour for boards from 2008/2009?
Thanks in advance.
Comment