DirecTiVo Power Supply Caps

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • moonchilddave
    New Member
    • Sep 2010
    • 2
    #1

    DirecTiVo Power Supply Caps

    New here...

    I've got a few DirecTV Phillips DSR704 TiVo's that have failing power supplies, so I'm at the point of replacing all the electrolytic caps - but am not sure what to order for replacements. Below are the original supply values (all are 105deg):

    C9 - 47uf / 50V (Teapo SEK)
    C14 - 2200uf / 10V (Ltec LZG)
    C15 / C20 /C42 - 470uf / 10V (Ltec LZG)
    C17 - 2200uf / 10V (Ltec LZG)
    C18 - 2200uf / 16V (Teapo SC)
    C23 - 470uf / 50V (Ltec LZG)
    C26 - 47uf / 63V (Teapo SEK)
    C27 - 1uf / 50V (Teapo SEK)
    C29 - 10uf / 50V (Teapo SEK)
    C34 / C35 - 2.2uf / 50V (Ltec) - unknown series (tiny black cap with gold banding and lettering)

    Any help or pointers would be greatly appreciated!
    Tags: None
    • retiredcaps
      Badcaps Legend
      • Apr 2010
      • 9271
      #2
      Re: DirecTiVo Power Supply Caps

      Originally posted by moonchilddave
      Any help or pointers would be greatly appreciated!
      PCBONEZ's instructions on how to "match" the right series of caps.

      https://www.badcaps.net/forum/showpo...47&postcount=3

      If Panasonic caps meet your requirements, follow PlainBill's instructions at

      https://www.badcaps.net/forum/showpo...33&postcount=2
      --- begin sig file ---

      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

      Please do not post inline and offsite as they slow down the loading of pages.

      --- end sig file ---

        Comment

        • stj
          Great Sage 齊天大聖
          • Dec 2009
          • 31015
          • Albion
          #3
          Re: DirecTiVo Power Supply Caps

          you need to add the diameter of each cap if they are tight together.

            Comment

            • moonchilddave
              New Member
              • Sep 2010
              • 2
              #4
              Re: DirecTiVo Power Supply Caps

              I was going to go back and add dimensions but it was past the time to edit. Unless I'm missing something it looks like the Nichicon PW series caps will work for all of them (someone correct me if I'm wrong). Although not sure about C34/35 as I'm not sure what series those are to begin with.

              The ones that I've selected that seem to be a best match:

              C9 - 47uf / 50V (Teapo SEK) - 6mm x 12mm : UPW1H470MED
              C14 - 2200uf / 10V (Ltec LZG) - 13mm x 20mm : UPW1A222MHD
              C15 / C20 / C42 - 470uf / 10V (Ltec LZG) - 8mm x 12mm : UPW1A471MPD
              C17 - 2200uf / 10V (Ltec LZG) - 10mm x 30mm : UPW1A222MPD6
              C18 - 2200uf / 16V (Teapo SC) - 13mm x 25mm : UPW1C222MHD
              C23 - 470uf / 25V (Ltec LZG) - 10mm x 16mm : UPW1E471MPD
              C26 - 47uf / 63V (Teapo SEK) - 8mm x 12mm : UPW1J470MPD
              C27 - 1uf / 50V (Teapo SEK) - 5mm x 12mm : UPW1H010MDD
              C29 - 10uf / 50V (Teapo SEK) - 5mm x 12mm : UPW1H100MDD1TD

              C34/35 don't have a series on the cap, but I'm guessing since all the Ltec caps in the original supply are LZG series that the PW series would be fine for them as well.

              C34 / C35 - 2.2uf / 50V (Ltec) - 4mm x 6mm : UPW1H2R2MDD

              These are a bit bigger but where they are located, should have plenty of room.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Tynan Dill
                  Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                  by Tynan Dill
                  I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                  Upon bringing it home and plugging it up, it showed a standby light.

                  I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                  The screen seems to blackout and stay black, but with a flashlight I can see the display.

                  With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                  Assuming...
                  ORIGINAL POWER SUPPLY BOARD
                  7 Photos
                  11-22-2024, 01:46 PM
                • sam_sam_sam
                  Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                  by sam_sam_sam
                  I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                  One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                  03-31-2024, 02:12 PM
                • sam_sam_sam
                  Modification to a ZD-987 desoldering/soldering station using a external switching power supply
                  by sam_sam_sam
                  I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

                  I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
                  07-01-2024, 06:34 AM
                • shamsudeen
                  Hi, Can we use SMPS Bench Power Supply for Laptop troubleshooting?
                  by shamsudeen
                  Hi all, I just need to know that, can i use SMPS type power supply to test and short circuit detection on a laptop motherboard?
                  I saw 95% of repair guys are using only Linear bench power supply. linear bench power supply is pricy, thats why i planned to get one SMPS supply.

                  i know that in linear power supply the noise will be very low comparing to SMPS supply....
                  07-19-2025, 07:14 AM
                • CMCM
                  Russound CA4 Power Supply Repair
                  by CMCM
                  Hello Everybody,

                  Trying to repair a power supply from a Russound CA4 Multizone Controller (picture attached)

                  Russound no longer supports it but were kind enough to provide a schematic of the power supply (pdf attached).

                  The outputs marked 12v and 20v are all measuring only 1v.

                  The board is clicking, which I think means it is in something called hiccup mode when the flyback transformers switches because of an internal problem or something else on the board Overloading it.

                  The capacitors physically look clean (no bludgesor leaks) and...
                  07-03-2025, 01:12 PM
                • Loading...
                • No more items.
                Working...