Hi, Guys. My first post, sorry if I get it wrong. Does anyone have the part #s for the two large caps on the AKai 4294, Power board BN96-00249A they are marked 330uf 450v 105 deg. They are located in the upper right of the power supply. All help is appreciated. DaGeo
-
-
Re: Cap Numbers
why do you need to replace them?
those are the primary caps, they rarely fail. unless there is unusual noise or if the caps are bloated, i would leave them alone.
if you need to, just find two caps that meet or exceed the uf/v and fit the board. (for that type, 330uf sounds a tad low).
edit- Post #3700!
Last edited by ratdude747; 08-22-2010, 12:31 PM.sigpic
(Insert witty quote here) -
Re: Cap Numbers more info
The two large caps in upper right corner of power supply are bulged out at the ends. As far as there ratings, 330uf 450v 105 deg is how they are marked.
Maybe I should relate the problem. Tv will turn on and play for an indefinite period of time them screen goes black but sound continues. If I unplug tv for about 10 seconds plug it back in it will come back on and play for another indefinite period of time. Any other ideas? thanks for your replies.Comment
-
Re: Cap Numbers more info
You don't have your country profile listed, but assuming you are in the USA, goto digikey.com and typeOriginally posted by DaGeo View Post
330uf 450v 105
into the search engine. Pick one that will match your height and diameter dimensions. Panasonic or United Chemicon would make good choices.--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file ---Comment
Comment