hp 14-ce1002ne DAG7ADMB8D0 boardview or schematic

[haroun]

can i please get schematic or boardview for
G7AD-2G please and thank you
DAG7ADMB8D0 REV D

[Eldiria]

Re: hp 14-ce1002ne boardview or schematic

Anyone have this? Have laptop but no display on hdmi or screen and 0v on a white fuse near hdmi.

Any help will be appreciated

[fairtone]

Re: hp 14-ce1002ne boardview or schematic

i want also HP G7AD-2G schematic or board view plz plz plz my laptop is dead

[mon2]

Re: hp 14-ce1002ne boardview or schematic

@fairtone, start a new thread in the repair laptop forum with details of your laptop.

Sometimes schematics are not required.

What is the fault? No power? Using the original adapter?

[fairtone]

Re: hp 14-ce1002ne DAG7ADMB8D0 boardview or schematic

yes bro i am using original charger but its not turning on i also checked the main mosfets and they are ok

[fairtone]

Re: hp 14-ce1002ne DAG7ADMB8D0 boardview or schematic

i think its display wire have some shortage its making this problem but now i remove also display cable but still not turning on
plz give me solution or board view or schematic plz

[SMDFlea]

Re: hp 14-ce1002ne DAG7ADMB8D0 boardview or schematic

i think its display wire have some shortage its making this problem but now i remove also display cable but still not turning on
plz give me solution or board view or schematic plz

The schematic isn`t available,and this is the schematics requests forum.Start a new thread in the main laptop forum if you want any more help.

[fairtone]

Re: hp 14-ce1002ne DAG7ADMB8D0 boardview or schematic

thanks for reply bro i will check

[SOMEYINGELSE]

Re: hp 14-ce1002ne DAG7ADMB8D0 boardview or schematic

can i please get schematic or boardview for
G7AD-2G please and thank you
DAG7ADMB8D0 REV D

hi, i need help finding shematics or identifing this component. already try to replace for another n-type mosfet- still geting bsof after gpu driver instalation

[anshad]

Re: hp 14-ce1002ne DAG7ADMB8D0 boardview or schematic

hi, i need help finding shematics or identifing this component. already try to replace for another n-type mosfet- still geting bsof after gpu driver instalation

Probably won't matter even if you replace the original part. The short is more likely to have caused irreversible damage to the CPU/SoC by sending 20 volt directly instead of stepping down to a smaller voltage (close to 1v). Since you have mentioned BSOD after installing the graphics driver, i assume the PWM in question supplies core voltage to the internal graphic engine of the CPU (Intel HD Graphics). I have Seen this kind of CPU damage caused by shorted Mosfet dozens of time.

[manh trung]

Re: hp 14-ce1002ne DAG7ADMB8D0 boardview or schematic

try... i think it's equivalent

[christian100]

Re: hp 14-ce1002ne DAG7ADMB8D0 boardview or schematic

i think it is only mosfet
on your picture you must not use the same part

[Pepito21]

Re: hp 14-ce1002ne DAG7ADMB8D0 boardview or schematic

try... i think it's equivalent

thank you

[redman13]

boardview

[vtkg]

boardview

THANKS BRO

[0901036268]

Please help me Hp 14 ce2041tu board view, schematics. thanks