Clevo W150HRMB-OD

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Chieftain
    Senior Member
    • May 2016
    • 72
    • Greece
    #1

    Clevo W150HRMB-OD

    Hello mates,,,
    I want a schematic for Clevo W150HRMB-OD.
    The laptop works fine but no screen leds on...
    I test 2 more screens with same results. No screen leds on.
    Any ideas?
    Thank you all.
    Tags: None
    • anshad
      Badcaps Veteran
      • Nov 2010
      • 249
      #2
      Re: Clevo W150HRMB-OD

      If external display OK but internal LVDS display not coming, there are multiple possibilities

      1] Screen failure - Less likely in your case as you have tried another screen already

      2] LVDS Cable failure

      3] One of the core LVDS supply is missing - check 19V LCD Backlight, 3V LCDVDD for Panel, Backlight on and PWM signals to control the backlight

      4] Discrete GPU Failure - Sometimes GPU failure may cause external display OK but LVDS display fail


      I believe the below Service manual is compatible with your model. It includes schematic diagram at Appendix B section

      https://cdn.badcaps-static.com/pdfs/...00aa56fffb.pdf

        Comment

        • Chieftain
          Senior Member
          • May 2016
          • 72
          • Greece
          #3
          Re: Clevo W150HRMB-OD

          extremely thanks for your reply...
          I have already found the schematic here :
          https://repo.palkeo.com/clevo-mirror/W1x0HRx/

          But it is a mess when I am trying to find lcd's cable pinouts in schematic
          It could be apriciated if someone knows the correct voltage per pin (the "wanted") for Led backlight trigger,,

          Thank you

            Comment

            • anshad
              Badcaps Veteran
              • Nov 2010
              • 249
              #4
              Re: Clevo W150HRMB-OD

              36,38,40 LEDP L_VIN = 19 volt

              33 BR IGH TN ESS_ R = between 1 - 3 volt

              28,30 PLVDD = 3.3 volt

              32 INV_ BL ON = 3.3 volt

                Comment

                • Chieftain
                  Senior Member
                  • May 2016
                  • 72
                  • Greece
                  #5
                  Re: Clevo W150HRMB-OD

                  I will check 36,38,40 ... There is no 19v in any pin ...
                  I really appreciate your help mate....

                    Comment

                    • Chieftain
                      Senior Member
                      • May 2016
                      • 72
                      • Greece
                      #6
                      Re: Clevo W150HRMB-OD

                      Unfortunately no difference to screnn LED light when I placed 19v to 36,38,40...
                      The other pins are voltage correct...
                      Any ideas?

                        Comment

                        • Chieftain
                          Senior Member
                          • May 2016
                          • 72
                          • Greece
                          #7
                          Re: Clevo W150HRMB-OD

                          ok... Finally I found a solution. I cut off 36-38-40 cables from base (red-orange-green), and I bridged them in 19v directly... Now laptop posts and screen LED back lights are fine... Thank you

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • Ryan.man
                              Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                              by Ryan.man
                              Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                              My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                              This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                              02-04-2025, 12:23 PM
                            • smic717394
                              iphone XS turns off when press on screen.
                              by smic717394
                              Hi,

                              I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                              07-25-2024, 10:16 AM
                            • Chrissygizmo
                              Samsung UE55JU6800K half screen dark
                              by Chrissygizmo
                              Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                              I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                              02-10-2025, 12:33 AM
                            • triplefour
                              TCL 65S403 Blank Backlit Screen w/ sound ... voltage besides 12v missing at LVDS
                              by triplefour
                              Blank Backlit Screen w/ sound verified via DVD on HDMi 3
                              no change to display when disconnect tcon
                              no change to display when disconnect panel cables (both sides, one at a time, etc-)
                              can faintly see a vertical dividing line splitting the panel even in half. super faint tho.
                              also can faintly see a black cloud in the center of the screen. a darker area.
                              color of screen is backlit black screen which basically looks gray
                              12v present at TCON fuse
                              other voltages on LVDS cable (TCON side) are missing. only see 2 pins with voltage .69v and .60v
                              ...
                              10-28-2021, 01:00 AM
                            • spice_disc
                              Vizio TV M50-C1 reboot cycle and static on screen
                              by spice_disc
                              I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

                              The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
                              1 Photo
                              09-08-2024, 02:37 PM
                            • Loading...
                            • No more items.
                            Working...