need high quality photo of da0r13mb6e1 schematic

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mitu_sharma
    Senior Member
    • Jul 2015
    • 182
    • india

    #1

    need high quality photo of da0r13mb6e1 schematic

    hi friends i need back side photo of pch and cpu core ic


    hp g6 da0r13mb6e1 rev e

    its non graphics board

    if any one have this board pls take photo and upload.
    thanks
  • meritosari
    Senior Member
    • Oct 2010
    • 774
    • Indonesia

    #2
    Re: need high quality photo of da0r13mb6e1

    https://www.badcaps.net/forum/showthread.php?t=44956

    screen shoot
    Attached Files

    Comment

    • ngoalong.lt
      New Member
      • Nov 2015
      • 2
      • viet nam

      #3
      Re: need high quality photo of da0r13mb6e1

      Originally posted by mitu_sharma
      hi friends i need back side photo of pch and cpu core ic


      hp g6 da0r13mb6e1 rev e

      its non graphics board

      if any one have this board pls take photo and upload.
      thanks
      Here you are
      Attached Files

      Comment

      • mitu_sharma
        Senior Member
        • Jul 2015
        • 182
        • india

        #4
        Re: need high quality photo of da0r13mb6e1

        thank you so much

        Comment

        • highpulse
          i hate HP
          • May 2013
          • 1488
          • portugal

          #5
          Re: need high quality photo of da0r13mb6e1

          whats the problem ?

          Comment

          • pchub
            Roman
            • Jul 2018
            • 13
            • nepal

            #6
            Re: HP G6 DA0R13MB6E1 QUANTA R13 REV. E / No power, No LEDs...

            R13 DA0R13MB6E1 REV:E can anybody have board view file??

            Comment

            • SAHILSHAIK
              Member
              • Jul 2024
              • 27
              • india

              #7
              Originally posted by meritosari
              Re: need high quality photo of da0r13mb6e1

              https://www.badcaps.net/forum/showthread.php?t=44956

              screen shoot
              could u please tell me which device did u use for scanning in 1200dpi

              Comment

              Related Topics

              Collapse

              • Deby
                DA0X8MMB6D0 Rev. D (HP Probook 440 G7) High Res Scans & BRD schematic
                by Deby
                ​Scanned motherboard in 1200DPI
                And here is the BDV schematic:
                https://www.badcaps.net/forum/troubl...hematic-needed...
                05-30-2024, 08:25 AM
              • mikkele86
                Luxman R-5045 - Voltage too high accordingly to schematic
                by mikkele86
                Hello.

                got this Luxman R-5045 vintage amplifier which need a good repair and service.
                finally got i started up and started to check voltages.

                My issues is that the voltage measured is 3,5v to 4v higher than whats stated in the schematic.
                Meaning voltages like +9v is like +13v
                and +31v is measured to 34.6v which is really close to the capacitors rating +35v

                I measured the voltage before the rectifier and im measuring 27v
                did a online calculator and it showed i should actually get +36v after the recifier :/

                So my question...
                04-20-2024, 07:18 AM
              • Robin21
                LENOVO T490 High quality photo of CPU area needed
                by Robin21
                Hello,

                Does anyone have a motherboard from the Lenovo T490 model FT490/FT492/FT590/FT531 NM-B901 and could take a picture of the CPU area, including all the components around it? I would be very grateful.

                During the CPU replacement process, I messed up all the resistors and capacitors, and now I can't get it to work again. The motherboard was powering up before, but now it doesn't, even with the newly installed CPU. All voltages are okay, and I don't have any shorts, so I'm assuming I'm missing one of the resistors.

                I've also followed the schematic and Broadview,...
                09-25-2024, 06:55 AM
              • Biruslapio
                Samsung's AU series "high quality" panel internally melting
                by Biruslapio
                I got this 55 inch AU7X00 TV, it was rebooting and showed no image only a blink of the backlights.

                I assumed it was either panel or motherboard. Turns out it was the panel, and after applying some tape on the ribbon cable that goes to the left side of the screen, the TV turned on with image, then I suddenly noticed a dark spot and the pixels were turning black on the left edge, I was sad and thought I smashed the screen somewhere, found nothing visually, it looked in perfect condition and if it was there before it would've been noticeable while I was inspecting the TV the first time....
                07-12-2024, 10:08 AM
              • Document Archive
                MediaTek MT8222 LCD TV Schematic
                by Document Archive
                MediaTek MT8222 LCD TV Schematic

                The MediaTek MT8222 is an ultra highly integrated single chip for flat panel TV
                supporting multimedia video/audio input and output format up to full HDTV. It includes
                advanced 3D comb filter TV decoder to retrieve the best image from popular composite
                signals and embedded HDTV/VGA decoders for the high bandwidth input signals perfectly
                reproducing.The new 4th generation advanced motion adaptive and motion estimation
                de-interlacer converts accordingly the interlace video into progressive one with overlay of a
                2D graphic...
                10-31-2024, 02:18 PM
              • Loading...
              • No more items.
              Working...