Please guys help me.
I need this schematic urgently.
The MOBO series is DAAX1IMB6A0.
Please....
I need this schematic urgently.
The MOBO series is DAAX1IMB6A0.
Please....
-
-
Re: HP G62-464TX Schematic please
This is what I have. -
Re: HP G62-464TX Schematic please
Thanks bro. But it's not that I need.
Thanks again
Comment
-
Re: HP G62-464TX Schematic please
check thisComment
-
Re: HP G62-464TX Schematic please
Search for Quanta AX1
https://cdn.badcaps-static.com/pdfs/...b48d0285d8.pdfComment
-
Re: HP G62-464TX Schematic please
Thank you all. Problem solved.
Comment
-
hey all. anyone have these for a Hp Zbook Firefly 14 G8 ...?
mobo: corvette-605qa321330-mb-a01(a1)10-19-2025, 05:31 AM -
Razer Blade 15 RZ09-0328
MOBO: DA550-MB MP V4.0 2020022707-10-2025, 03:40 AM -
Hey everyone,
I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.
Instead, here's what's been bugging me so far:
The schematic... -
Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this... -
Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.
I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.
Thanks.
Comment