Looking for the PDF schematic and component placement files for the 820-01523 ( iPhone 11 ), I have a BRD but all the namings are generic so I need a schematic + component-placement image so I can update the information to produce a proper fleshed out boardview
-
YouTube Repair Videos - https://www.youtube.com/user/19PLD73
FlexBV BoardView software - Linux/OSX/Windows - http://pldaniels.com/flexbv -
My YouTube channel - https://www.youtube.com/channel/UCiD...5d6OgizDqoi_SA -
-
bro pls bvr fileComment
-
Does anyone here have a complete schematic diagram (with board layout) of iPhone 11 Pro Max? I cannot afford to pay for boardviewer subscription so i'm hoping anyone would like to share. thank you!07-24-2025, 04:04 PM -
Hi everybody,
i am looking for the value of a resistor, that got missing on an iPhone 13 pro.
I attached a picture, where the resistor is marked.
maybe someone of you has a spareboard and can measure the value?
Thank you very much :-)...05-27-2025, 05:34 AM -
Hi there,
i am at the present struggling with an iPhone 13.
Can someone tell me the values of the three caps marked in the picture close to Pin 1?
They are caps or am I wrong?
Photo was taken from a youtube video.
Thank you very much and greetings from Cologne!...06-25-2024, 02:07 PM -
Hello,
I have an iPhone 4S which I don't have the passcode.
I am trying to reset it using iTunes but it cannot even get detected by my computers.
I tried plugging it in a Windows 11 laptop and a Macbook Air M2.
The current shows 5v 1amp when plugged into a charger,
but it stays at 5v 0.1a when plugged into a PC.
I tried in DFU mode and Recovery mode, I get the same results.
Could it be the cable?
Thank you -
[REQUEST] ThinkPad T14 Gen 1 (20S1) - Custom Boot Logo Modification
Hello everyone!
I hope this is the right section for this request. I'm looking for help to modify the boot logo on my ThinkPad T14 Gen 1.
System Information:- Model: Lenovo ThinkPad T14 Gen 1
- Machine Type: 20S1S4E600 (Intel i7 variant)
- Current BIOS: N2XET42W (1.33) - Latest version
- BIOS File: n2xuj25w.exe (12.98 MB) - Downloaded from Lenovo support
Replace the default "LENOVO" boot logo with a custom image during POST.
🔧 What I've tried:- [
Comment