FITC error

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Udemzy
    Senior Member
    • May 2017
    • 155
    • Guatemala

    #1

    FITC error

    I've search the group on how to rectify this error but can't find any,I'm using an Intel celeron Asus laptop ,4gb ddr4.

    I've used all kinds of fitc tool versions, sometimes it will work fine and sometimes I'll get this error.

    Pls,is there a way i can solve this issue once and for all?

    I have attached a picture of the error I get when trying to open a bin file.
    Attached Files
  • imranromi
    Badcaps Legend
    • Jan 2015
    • 1288
    • Pakistan

    #2
    Re: FITC error

    Send here bios i will check which version you use for clean me

    Comment

    • Udemzy
      Senior Member
      • May 2017
      • 155
      • Guatemala

      #3
      Re: FITC error

      Originally posted by imranromi
      Send here bios i will check which version you use for clean me
      This is the file, thanks for the quick response.
      Attached Files

      Comment

      • hoaca388
        Badcaps
        • Jan 2022
        • 11610
        • Socialist Republic of Vietnam

        #4
        Re: FITC error

        Originally posted by Udemzy
        This is the file, thanks for the quick response.
        Tool
        You are error because use FITC version 11 for ME version 12
        Attached Files
        Last edited by hoaca388; 07-24-2022, 08:28 PM.


        ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
        Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------

        Comment

        • Udemzy
          Senior Member
          • May 2017
          • 155
          • Guatemala

          #5
          Re: FITC error

          Originally posted by hoaca388
          Tool
          You are error because use FITC version 11 for ME version 12
          Thanks for the response,i want to understand something, if it ME version 10,i'"ll have to use FITC version 10 or above right?

          Comment

          • hoaca388
            Badcaps
            • Jan 2022
            • 11610
            • Socialist Republic of Vietnam

            #6
            Re: FITC error

            No . ME version 10, you have to use FITC version 10.


            ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
            Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------

            Comment

            • Udemzy
              Senior Member
              • May 2017
              • 155
              • Guatemala

              #7
              Re: FITC error

              Originally posted by hoaca388
              No . ME version 10, you have to use FITC version 10.
              Thanks for the clarification.

              Comment

              Related Topics

              Collapse

              • ChattFix
                PS5 Slim Beep No Light UART DDR4 Error
                by ChattFix
                Hello everyone, I need some help with a PS5 Slim board EDM-040 that will beep but no light or fan spin.

                When I connect my bench power supply, (12v 0.500amp) the amps go between .135-.035 then back to .005.

                When I attach UART I get the error code below. I have replaced the DDR4 ram IC with one from a donor board. Cannot verify is the IC was working or not, still same error.

                [Slot #] [Date Time] [Error Code] [Priority] [Error Message]
                00 5/27/2024 4:25:40 PM 80871001 Low DDR4 Error (Power Failure or Short Circuit)
                |-(OK 00000000 80871001 17554CCE...
                05-27-2024, 02:51 PM
              • Sus256
                HISENSE 65E7KQ PRO - no boot
                by Sus256
                Hi all!

                HISENSE 65E7KQ PRO
                RSAG7.820.13512 - chassis
                MT9618BAATAB - cpu
                RSAG7.820.12059 - power
                HD650Y3U77 - panel
                KLM8G1GETF - emmc

                The TV does not turn on, the standby indicator is on. All voltages are present.
                Emms is dead. Not readable, not detected.
                Replaced emmc.
                But with another dump there is no launch

                Terminal log

                UART
                <
                AC_ON
                RPMB key is not yet programmed

                HASH1_VERSION=0x00000000 64bit
                E-B
                FDE enabled
                layout pattern onebin by SAR7,0...
                06-01-2025, 02:11 AM
              • Superbee_dad
                Sharp 80” long short flash backlight error - Help
                by Superbee_dad
                Hello Sharp TV experts
                Our Sharp LC-80LE642U displays one short one long flash error code which is a backlight error. I went into service mode and there were 8 lamp error counts recorded. I reset the count to 0 and did a reset. The last monitor error cause was 16 B00014639:12. 16 is the code for backlight error. I tried to power the tv up but went back into error mode.

                > I checked voltages on the power supply board and they all check out .. including 3.28 volts at the error pin.
                > There is power to the cpu and T-CONN and no faults found there. The cpu has a flashing...
                01-24-2025, 11:51 PM
              • Maalobs
                Philips 60PFL8708S/12 - QFU1.2E LA - Error code 53
                by Maalobs
                Hi,

                I have a 2014 vintage Philips 60PFL8708S/12 that suddenly died in the middle of the kids watching a show.

                The relevant service manual for the chassis is available here.
                The TV no longer powers on, and leaving it powered on for a few minutes results in the layer-1 error with 2 blinks.
                When I short the SDM to ground I get the layer-2 error code 53.

                The inside of the TV has no damaged components and no swollen capacitors.
                In SDM-mode when all the power rails are left on despite entering the protection mode, I tracked down and measured...
                04-02-2019, 01:15 PM
              • medinfo
                Mac T2 after update(There was an error activating your device)
                by medinfo
                Macbook Pro 2019 T2
                iCloud OFF
                MDM unlocked by changing Serial Number
                worked fine but after latest update see (There was an error activating your device. Please try again).
                Erased and boot in internet recovery, same error.
                changed to original serial number (iCloud OFF & MDM ON), same error.
                tested with others serial number, same error.
                tested (CMD+R), (Option+CMD+R), (Shift+Option+CMD+R), same error
                Revived and restored by Apple Configurator and same error.

                Any help ?
                12-31-2023, 02:04 PM
              • Loading...
              • No more items.
              Working...