Hi. can someone help me to get zed note 14i firmware file. I've visited the web but the web seems to have been closed. Please help
NAME : ZED NOTE 14i
KODE PART : IL.1406G.264WAESW
NAME : ZED NOTE 14i
KODE PART : IL.1406G.264WAESW
-
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs. -
Re: someone help me to get zed note 14i firmware file
my backup.....
NAME : ZED NOTE 14i
KODE PART : IL.1406G.264WAESWComment
-
Re: someone help me to get zed note 14i firmware file
Here is your file with a cleaned ME, try it first.Comment
-
-
Re: someone help me to get zed note 14i firmware file
Is your problem solved i have also have this problemComment
-
Re: someone help me to get zed note 14i firmware file
i also have same problem with same modelComment
-
Hi,
Can someone help me to get zed note 14i firmware file. I've visited the many websites but the web seems to have been closed.
Please help
NAME : ZED NOTE 14i
KODE PART : IL.1406G.264WAERWComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Hi Everyone,
I understand how challenging it can be to identify and resolve this issue. After dedicating two days to troubleshooting, I finally discovered a solution and wanted to share it to assist others facing the same problem.
For a detailed explanation, please refer to the following link:
https://www.youtube.com/watch?v=vl5mbJpSf1I
Hope it helps.
Regards,
AnkitComment
-
Hi,
My LG Soundbar, SK10Y, has somehow ended up in an endless "PLEASE WAIT" loop and I am now starting to suspect that the firmware is causing this, and I can't manage to connect via the app to push a new firmware in as it never really starts.
I can trick it to start via HDMI ARC and it actually starts up, flashes OPTICAL and then goes to ARC where the sound (including sub) is perfect, but the white led indicator keeps blinking and after 20 seconds it says "GOOD BYE" and shuts down.
During these seconds the function button is not working... -
Hi all,
I picked up a Marantz NR1501 that the seller said did not produce any audio, but was starting up just like normal. This was indeed the case and the hunt for damaged components started.
After confirming all voltages and replacing all caps on this godforsaken HDMI-board I finally got sound from the AUX input, but all digital inputs are still dead.
The service menu shows no DSP version so I desoldered IC1604 that should have the serial flash DSP firmware on it and made two dumps that turned out identical.
The content of these seems to be useless as far... -
Hi,
I'm hoping someone with access to the Samsung GSPN can help me. I need someone with access to download a firmware file for my PN63C550 TV, as it will fix a problem per the Samsung service bulletin.
You can reference Samsung bulletin #:ASC20130528001 and I need the [2D63]LOGIC.bin file please.
The full service bulletin is linked here: https://www.avsforum.com/attachments...3-pdf.1080602/
Will you please help me get the [2D63]LOGIC.bin file for my TV?05-17-2025, 02:47 PM -
Hi everyone
I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
Programmer models: XGecu TL866II Plus / T48 / T56 / T76
Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
There's also an extra OTP Secu.R... -
Hi I need bios or firmware dump file to printer Epson et-2756. Can you help me. My printer is bricked in printer mode and i need reprogram chip on board01-18-2025, 11:38 AM
Comment