FPW50 LA-H324P Rev 1.0

[ScorpioMan86]

Hi There,

I would like to request a bios build for LA-H324P, the laptop has 5.3 HP Blink code, WIN+B Bios recovery option doesnt work.

Ive attached the current bios.

Laptop Model number is 15-dw00031ni
Its an i7 8th Gen with an nvidia gpu (not sure of the gpu model number)

ProID : 7dq62ea#acq
SN : cnd9301j0p

Thank you

[SMDFlea]

Re: FPW50 LA-H324P Rev 1.0

the serial number is wrong.The model is 15-dw0031ni

[ScorpioMan86]

Re: FPW50 LA-H324P Rev 1.0

the serial number is wrong.The model is 15-dw0031ni

Thanks for the response, i mistyped the model number. the serial number should be correct. i have uploaded the picture form the base of the laptop

[SMDFlea]

Re: FPW50 LA-H324P Rev 1.0

Thanks for the response, i mistyped the model number. the serial number should be correct. i have uploaded the picture form the base of the laptop

Go to the HP support site,enter the serial number or model number to find the drivers and bios.Download the bios update sp135991.exe .Run the exe,select the option to save the bios image to a location you choose. The exe will decrypt and extract seven bios for different models.Two are 8MB so they aren`t for your laptop,that leaves five.
Download HxD hex editor and open your bios backup with it https://mh-nexus.de/en/downloads.php?product=HxD20, search for the word BID08 to find your bios ID .Open the matching 08***.bin virgin bios with HxD.
Click back onto your bios backup tab,Select the offsets in the attached picture and copy the DMI (serial,win key,feature byte etc) and paste-insert into the virgin bios using the same offsets and save the file.
.

[ScorpioMan86]

Re: FPW50 LA-H324P Rev 1.0

Go to the HP support site,enter the serial number or model number to find the drivers and bios.Download the bios update sp135991.exe .Run the exe,select the option to save the bios image to a location you choose. The exe will decrypt and extract seven bios for different models.Two are 8MB so they aren`t for your laptop,that leaves five.
Download HxD hex editor and open your bios backup with it https://mh-nexus.de/en/downloads.php?product=HxD20, search for the word BID08 to find your bios ID .Open the matching 08***.bin virgin bios with HxD.
Click back onto your bios backup tab,Select the offsets in the attached picture and copy the DMI (serial,win key,feature byte etc) and paste-insert into the virgin bios using the same offsets and save the file.
.

Thank you,i followed the instruction and issue still persists. please see my edited bios. I will continue to check what else might be causing this issue

[SMDFlea]

Re: FPW50 LA-H324P Rev 1.0

Thank you,i followed the instruction and issue still persists. please see my edited bios. I will continue to check what else might be causing this issue

Your edited bios is AOK .It could be a ram problem,try some other know working ram,try pressing down lighly on the ram slot while booting, and check all the pins.If youve got a KBC EC programmer you can flash that as well .

[ScorpioMan86]

Re: FPW50 LA-H324P Rev 1.0

Your edited bios is AOK .It could be a ram problem,try some other know working ram,try pressing down lighly on the ram slot while booting, and check all the pins.If youve got a KBC EC programmer you can flash that as well .

Thank you, i used the ioprogrammer to backup the ene chip and program it with the file attached, i believe it is fair to assume the issue is not bios/firmware related.

Laptop behaves the same after programming, change of ram or no ram doesnt change the blink code

Ive also uploaded the file read from the ENE chip before programming

[lukasrz]

Re: FPW50 LA-H324P Rev 1.0

Propably CPU problem, I have the same problem. 3/5 blink codes

I attached BIOS 085F1.bin from HP site + EC from that bios file

FPW50 LA-H324P Rev 1.0
15-dw1014ne



still 3/5 blink codes

[kingkong computers]

Re: FPW50 LA-H324P Rev 1.0

100% ok tersted working bios enjoy friends

[SMDFlea]

Re: FPW50 LA-H324P Rev 1.0

100% ok tersted working bios enjoy friends

Thanks for sharing,it may be working but not 100% as the ME firmware is initialised.
.