Can anyone share the usb rom files from this programmer?
-
-
Re: BY-U301 software and usb rom files requested
They are coming. One of the other techs on this forum has the tool on order and will share the ROM files upon arrival. -
-
Re: BY-U301 software and usb rom files requested
Machine: Macbook Pro 2017 13" A1708
Board number: 820-00840-A
IC: U2890Comment
-
Re: BY-U301 software and usb rom files requested
Machine: Macbook Air 2019 A1932
Board number: 820-01521
IC: U2890Comment
-
Re: BY-U301 software and usb rom files requested
Machine: Macbook Pro 15" 2018 A1990
Board number: 820-01041-A
IC: U2890 + UB090Comment
-
Re: BY-U301 software and usb rom files requested
Many thanks for the posted dumps.
Could we trouble you to post the other USB rom dumps from the BY-U301 tool for a complete collection?Comment
-
Re: BY-U301 software and usb rom files requested
A2179
820-01958Comment
-
Re: BY-U301 software and usb rom files requested
A2141
820-01700Comment
-
Re: BY-U301 software and usb rom files requested
Hello guys, do have somebody 820-02020 ROM file please?Comment
-
Re: BY-U301 software and usb rom files requested
Hi,
T2 Rom file, for A1989 820-00850-A? Anyone?Comment
-
Re: BY-U301 software and usb rom files requested
A2251 rom files, anyone got please?.Comment
-
Re: BY-U301 software and usb rom files requested
All there.Comment
-
Re: BY-U301 software and usb rom files requested
Hi Sir, thank you so much for the files. So great of you.Comment
-
Hi has anyone got the latest software for the TL866CS MiniPro EPROM programmer version 03.2.86 is installed now i have tried the update site in the programmer software but it wont connect to their website i am running windows 10
Edit found this site programmer works now http://www.xgecu.com/EN/Index.html -
Greetings badcaps community,
I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.
Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.
I have a Elitebook 820 G1 and a Elitebook 840 G2 here.
These ask for a password when entering the BIOS, but boot just fine from the internal SSD.
I learned that desoldering...10-29-2024, 06:03 AM -
Can anyone share the T2 rom .BIN files from this programmer? -
Common SPI bios chip programming Questions and Answers
----------------------------------------------------------
Q: I have a bios request,i can`t post my backup as i can`t read from the chip.
A: If you can`t read from it how do you expect to write to it ?.
Q: Why is my bios chip unreadable ?.
A: The programmer is faulty or has a worn or broken zif socket.
The USB cable is frayed,connector pins worn or some other physical damage.
Not enough amperage or voltage to power the programmer properly.
Bad...09-02-2021, 04:40 PM -
Recently purchased myself a Lenovo Laptop L14 Gen 2 AMD version.
Like with a lot of these used laptops sold on ebay, they come with a bios password.
I tried the typical solutions of unplugging the cmos battery, shorting the terminals, and waiting an hour. Didn't work.
So I dug deeper to find out I need a CH431A programmer and SOIC8 clip to read the bios off the GD25Q80CSIG NOR Flash and decrypt the password.
I have tried doing this, but each time I try loading the .BIN file in UEFITool, i get: "not a single Volume Top File is found, the image may be corrupted"....
Comment