Can anyone share the T2 rom .BIN files from this programmer?
-
Last edited by andreascy25; 06-20-2022, 05:16 AM. -
Re: BY-T200 software and .BIN rom files requested
Yes please, I really need the original bin files
Thank you
-
Hi has anyone got the latest software for the TL866CS MiniPro EPROM programmer version 03.2.86 is installed now i have tried the update site in the programmer software but it wont connect to their website i am running windows 10
Edit found this site programmer works now http://www.xgecu.com/EN/Index.html -
Greetings badcaps community,
I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.
Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.
I have a Elitebook 820 G1 and a Elitebook 840 G2 here.
These ask for a password when entering the BIOS, but boot just fine from the internal SSD.
I learned that desoldering...10-29-2024, 06:03 AM -
Common SPI bios chip programming Questions and Answers
----------------------------------------------------------
Q: I have a bios request,i can`t post my backup as i can`t read from the chip.
A: If you can`t read from it how do you expect to write to it ?.
Q: Why is my bios chip unreadable ?.
A: The programmer is faulty or has a worn or broken zif socket.
The USB cable is frayed,connector pins worn or some other physical damage.
Not enough amperage or voltage to power the programmer properly.
Bad...09-02-2021, 04:40 PM -
Recently purchased myself a Lenovo Laptop L14 Gen 2 AMD version.
Like with a lot of these used laptops sold on ebay, they come with a bios password.
I tried the typical solutions of unplugging the cmos battery, shorting the terminals, and waiting an hour. Didn't work.
So I dug deeper to find out I need a CH431A programmer and SOIC8 clip to read the bios off the GD25Q80CSIG NOR Flash and decrypt the password.
I have tried doing this, but each time I try loading the .BIN file in UEFITool, i get: "not a single Volume Top File is found, the image may be corrupted".... -
Can anyone share the usb rom files from this programmer?
Comment