EZP2019 Programmier winbond 25q128fv??

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • samtron786
    Senior Member
    • Aug 2016
    • 170
    • germany

    #1

    EZP2019 Programmier winbond 25q128fv??

    Hello how can I erase the chip 25Q128FV and write it again when I try to do that, in the end such an error comes up
    i leave a picture too
    Flash check error address:0h

    Thanks very much
    Attached Files
  • Repdata
    Senior Member
    • May 2020
    • 67
    • Deutschland

    #2
    Re: EZP2019 Programmier winbond 25q128fv??

    Hello

    look here

    EZP2019 Programmer MOD

    https://www.youtube.com/watch?v=8_sCP9a56cw
    Last edited by Repdata; 09-24-2021, 11:34 AM.

    Comment

    • samtron786
      Senior Member
      • Aug 2016
      • 170
      • germany

      #3
      Re: EZP2019 Programmier winbond 25q128fv??

      Unfortunately, it didn't help that the chip doesn't find it automatically
      still the same bug

      is there a new firmware update for my programmer?
      Last edited by piernov; 09-28-2021, 04:25 AM. Reason: double post

      Comment

      • Bonzas
        Badcaps Veteran
        • Jan 2018
        • 472
        • Indonesia

        #4
        Re: EZP2019 Programmier winbond 25q128fv??

        Did u use clip for programming ?

        Comment

        • samtron786
          Senior Member
          • Aug 2016
          • 170
          • germany

          #5
          Re: EZP2019 Programmier winbond 25q128fv??

          Yes,
          I also have other chip unfortunately not recognized as automatic
          when I press the test but there is another chip info

          Clip
          the Ebel do you mean that?
          Last edited by piernov; 09-28-2021, 04:25 AM. Reason: double post

          Comment

          Related Topics

          Collapse

          • CapThatBrass
            RT809F Chip Write Failure - Winbond 25R256JV
            by CapThatBrass
            Hi,

            I've managed to take an image dump in BIN format of my Dell Latitude 5420, which had a Winbond 25R256JV chip installed.

            I used an RT809F programmer to obtain the BIN, using the supplied iFix RT809F programmer application (latest version being 20220830).

            The programmer automatically found the settings to read the chip but selected the Winbond W25Q256FV instead (my actual model isn't available on the listing within the software). The image came out fine - I did this multiple times to clarify the data being read was the same each time.

            ...
            10-04-2022, 11:56 AM
          • ahmedtou
            HOW CAN I UPDATE HL-DT-ST BD-RE GGW-H20N XA02
            by ahmedtou
            Hi everyone,
            help me please


            I have an HL-DT-ST BD-RE GGW-H20N with ROM version: XA02.




            When I tried to burn a 25GB Blu-ray disc using ImgBurn, I got an error.
            I will share all the details with you, including the disc information.




            Code:
            HL-DT-ST BD-RE  GGW-H20N XA02 (ATA)
            Current Profile: BD-R
            
            Disc Information:
            Status: Empty
            State of Last Session: Empty
            Erasable: No
            Free Sectors: 12,219,392
            Free Space: 25,025,314,816 bytes
            Free Time: 2715:27:17 (MM:SS:FF)
            Next
            ...
            08-27-2025, 08:49 AM
          • testaccgta
            Unable to verify IC or write/erase/flash BIOS file to XMC QH128AHIG SPI chip using NeoProgrammer/AsProgrammer
            by testaccgta
            Hi, everyone!

            I've recently acquired two brand new SPI chips to replace the one currently in my Acer A514-54G laptop MB (FH5AT LA-K092P). The reason why I'm replacing the current SPI chip is because I had some difficulties with a third-party IT assistant who pretty much lacked the soldering skills and ended up destroying the current SPI chip soldered to my MB from factory.

            I've decided to do this on my own because I spent the past month or so learning some soldering skills and BIOS modding through Badcaps and WinRaid forums, hence the attempt. I've also chosen to buy...
            09-01-2024, 08:24 PM
          • rockman97
            Asus TUF X570 GAMING PLUS Motherboard BIOS fix
            by rockman97
            Hello,
            I had my old motherboard i really want build a HTPC and i want use this mobo but i tried BIOS update in 2024 and the motherboard is cooked it get orange led only tried change cpu ram everything but can't fixit. (I bought the motherabord second hand in 2023.)
            It has a Winbond 25Q256JWEQ (I think this is a 1.8V model so i used the 1.8v adapter aswell.) Bios chip on it i tried reflash with my EZP2019+ programmer but when i manually choose a chip like similar to this i click the read button and only shows 000 and i can erase it when i try write i can't verify it.

            I...
            08-24-2025, 01:01 PM
          • Syseng
            Lenovo P14s Gen 5 SVP unlock
            by Syseng
            This sums up discussion related to Lenovo P14s Gen5 in this thread. Credits go to Sbaro and especially Maxpower3. The locked dump is attached.

            The device is based on NM-F871 motherboard with Nuvoton NPCK397 series controller. The motherboard also contains three BIOS chips: two different Winbond chips for main BIOS and external EC flash, and also a Gigadevice chip which purpose I do not know. The password information is contained directly in controller and thus can be manipulated by reprogramming it, so reprogramming BIOS chips is technically not required, however you may wish to make...
            06-22-2025, 07:44 AM
          • Loading...
          • No more items.
          Working...