IdeaPad 3 14ADA05/15ADA05/17ADA05 Lenovo V14-ADA/V15-ADA Bios

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • jjloljj
    replied
    Still same, now power button is flashing... any idea would be much appreciated! Thank you for your assist hoaca388

    Leave a comment:


  • hoaca388
    replied
    Originally posted by jjloljj
    Hello guys please help black screen not booting nor bios. Ideapad 3 15ADA05 81W1 SN PF28B53H MTM 81W1008WGM Attaching original bios from laptop
    IdeaPad 3 15ADA05 Laptop - Type 81W1

    Attached Files

    Leave a comment:


  • jjloljj
    replied
    Hello guys please help black screen not booting nor bios. Ideapad 3 15ADA05 81W1 SN PF28B53H MTM 81W1008WGM Attaching original bios from laptop
    Attached Files

    Leave a comment:


  • peste
    replied
    Originally posted by rindorika
    Hello,

    I have attached my original dump. Could you please check and correct it? Thanks.

    LENOVO 15-ADA MODEL 82C7
    SN: PF2KVQ11
    MTM: 82C7007KTX​
    you have everything you need at post #217..

    Leave a comment:


  • rindorika
    replied
    Hello,

    I have attached my original dump. Could you please check and correct it? Thanks.

    LENOVO 15-ADA MODEL 82C7
    SN: PF2KVQ11
    MTM: 82C7007KTX​
    Attached Files

    Leave a comment:


  • SMDFlea
    commented on 's reply
    Thread merged. Read post 1 ,everything you need is right here in this thread.

  • reparacipo
    replied
    Hi guys,
    Please I need to repair this bios.
    I commented: The cover does not have the model data, serial number, etc., I do have the backup of the original bios, but it does not give me an image, I have tried creating a bios from the website and it works but the notebook model does not appear , nor the MTM, nor the serial number.
    Can the bios be repaired?​
    Attached Files

    Leave a comment:


  • peste
    replied
    Originally posted by Seb RS
    Hello,
    Same as everyone else, black screen at boot on a Lenovo 17ADA05.
    I followed the tutorials.
    I extracted the bios to recover the original DMI block but the ROM is completely empty !

    Can you help me ?
    Lenovo 17ADA05
    Model: 81W2
    SN: PF3FRKGZ
    MTM: 81W20059EN
    you have everything you need at post #217...

    The bios chip must be unsoldered from the board before writing or reading..
    do not use the clip, you may have errors..if you do not have anything to unsolder it with,
    solder wires between the programmer and the bios chip..​

    Leave a comment:


  • Seb RS
    replied
    Hello,
    Same as everyone else, black screen at boot on a Lenovo 17ADA05.
    I followed the tutorials.
    I extracted the bios to recover the original DMI block but the ROM is completely empty !

    Can you help me ?
    Lenovo 17ADA05
    Model: 81W2
    SN: PF3FRKGZ
    MTM: 81W20059EN​

    Leave a comment:


  • SMDFlea
    replied
    Originally posted by MrMike25
    I have an Lenovo ideapad 3 15ADA05 with a bios password​. I pulled the bin file off the bios chip but I can't seem to find where the password is located to translate it from a hex editor. I can reflash the bios but it removes everything even the product key. I really like to find the password so I can enter it and remove it. I have done this in the past but it's been years since. I can see where it says supervisor password and password in the hex editor but the coding isn't letting me convert it into a password. Any help would be greatly appreciated. Thanks!
    Thread merged. Please read the rules, the laptop serial number must be posted with every bios request. Read post 1 you can add the DMI from your backup to the new bios using the script.

    Leave a comment:


  • MrMike25
    replied
    I have an Lenovo ideapad 3 15ADA05 with a bios password​. I pulled the bin file off the bios chip but I can't seem to find where the password is located to translate it from a hex editor. I can reflash the bios but it removes everything even the product key. I really like to find the password so I can enter it and remove it. I have done this in the past but it's been years since. I can see where it says supervisor password and password in the hex editor but the coding isn't letting me convert it into a password. Any help would be greatly appreciated. Thanks!
    Attached Files

    Leave a comment:


  • hoaca388
    replied
    Originally posted by Crazy Dad

    Hello, thank you for helping, but the BIOS you posted didn't help, still a black screen with a blinking backlight
    Then you should check the hardware.

    Leave a comment:


  • Crazy Dad
    replied
    Originally posted by hoaca388

    V15-ADA Laptop (Lenovo) - Type 82C7

    Hello, thank you for helping, but the BIOS you posted didn't help, still a black screen with a blinking backlight

    Leave a comment:


  • hoaca388
    replied
    Originally posted by Crazy Dad
    Hello, please help me with the BIOS,

    LENOVO 15-ADA MODEL 82C7
    SN: PF2NS1TZ
    V15-ADA Laptop (Lenovo) - Type 82C7

    Attached Files

    Leave a comment:


  • Crazy Dad
    replied
    Hello, please help me with the BIOS,

    LENOVO 15-ADA MODEL 82C7
    SN: PF2NS1TZ
    Attached Files

    Leave a comment:


  • peste
    replied
    Originally posted by its service
    Model : V15-Ada
    SN : pf26b1fc
    Part no : Nm-d151 rev 1.0
    Problem no display need to onboard ram disable, I'll attached the originial dump
    try..
    Attached Files

    Leave a comment:


  • its service
    replied
    Model : V15-Ada
    SN : pf26b1fc
    Part no : Nm-d151 rev 1.0
    Problem no display need to onboard ram disable, I'll attached the originial dump
    Attached Files

    Leave a comment:


  • than_22
    replied
    Originally posted by SMDFlea
    This one Solved the issue,, Thank You,, GODbless Badcaps Forum

    Leave a comment:


  • SMDFlea
    replied
    Originally posted by than_22

    not working,, laptop no display with this bios
    Disable RAM by resistor straps - https://www.badcaps.net/forum/troubl...vo-ip3-nm-d151

    Leave a comment:


  • than_22
    replied
    Originally posted by shiyab

    hi try
    not working,, laptop no display with this bios

    Leave a comment:

Related Topics

Collapse

  • Document Archive
    Lenovo IdeaPad 3 15ADA05 Notebook 3 Specification for Upgrade or Repair
    by Document Archive
    This specification for the Lenovo IdeaPad 3 15ADA05 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 3 15ADA05 boardview and 3 15ADA05 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for Lenovo...
    09-07-2024, 05:00 AM
  • Patriarxis
    Lenovo IdeaPad 3 14ADA05 dosen't turn on
    by Patriarxis
    Hello.

    I have a Lenovo IdeaPad 3 14ADA05 that it dosen't turn on.

    It takes 0.027A and the power button flashing.

    All the voltages on the board are ok. 3.3, 5 etc.

    Also is charging the buttery .

    What else i can check?​
    05-26-2025, 01:03 AM
  • hotcrossedbuns999
    IdeaPad 1-14ADA05 Laptop - (Type 82GW) bios
    by hotcrossedbuns999
    First off, I saw the other thread, but that seems to be a different version (same model though), because I tried all of the linked bioses and none work. They actually cause the laptop to do nothing. At least when I use the bad bios, lights come on. (charging light, power button light, and caps lock light), but no screen.

    Another thing is that the bios has a different name (Old thread has "e8cn36ww" and mine is "fqcn31ww") and the BIN in this thread (below) are 8mb, and the CAP file that I get is 16mb (after using innextract 1.9). I don't know how to get the BIN...
    05-21-2025, 05:59 PM
  • pcwhiz24
    Bricked Lenovo IdeaPad 3 14ADA05 Need BIOS file for FN+R Crisis recovery
    by pcwhiz24
    Model: Lenovo IdeaPad 3 14ADA05 81W0
    S/N: PF2BZS7D

    I was having issues with this particular laptop where the NVME SSD would disappear and would not detect unless I took it out and reconnected it, then it would detect for only for a minute then disappear from BIOS. I figured updating the BIOS was worth a try so I booted into my HBCD USB and downloaded the latest BIOS file for that exact model. I ran the executable and everything went smooth, it beeped and then when it restarted, now it won't post, just black screen with fan spinning.

    I already have a CH341A programmer...
    04-07-2025, 07:10 PM
  • Visual_vt
    Lenovo IdeaPad 3 15ADA05 Model: 81W1, how to disable onboard MICROTEC RAM?
    by Visual_vt
    Lenovo IdeaPad 3 15ADA05 Model: 81W1, how to disable onboard MICROTEC RAM?
    Laptop freezes, sometimes no picture. POST every time with 4GB additional memory but still freezes in the windows.
    SSD and BIOS seems to be OK.
    Thank you....
    12-30-2024, 09:14 AM
  • Loading...
  • No more items.
Working...