IdeaPad 3 14ADA05/15ADA05/17ADA05 Lenovo V14-ADA/V15-ADA Bios

[peste]

Hi everyone

i have a lenovo V15-ADA
Model 82C7
Serial PF2CZ1AN
MTM 82C7S00B00


after updating the bios the LEDs light up, the fan spins but nothing else happens, i saved my bios can you help me?

you have everything you need at post #341...

[hoaca388]

Hi everyone

i have a lenovo V15-ADA
Model 82C7
Serial PF2CZ1AN
MTM 82C7S00B00


after updating the bios the LEDs light up, the fan spins but nothing else happens, i saved my bios can you help me?

Here

[antiogu]

Hi everyone

i have a lenovo V15-ADA
Model 82C7
Serial PF2CZ1AN
MTM 82C7S00B00


after updating the bios the LEDs light up, the fan spins but nothing else happens, i saved my bios can you help me?

[pblenov541]

you have everything you need at post #1,and12...

Thanks

[peste]

Hello,


I flashed the bios of my lenovo 15ADA05 with the latest bios available on lenovo. Unfortunately, after the installation procedure with continuous sounds, I had a black screen and tried to restart. Then the computer remained with a black screen on reboot and the fan running normally. Impossible to launch the bios. So I dismantled the computer and tried flashing with cha341. I was able to read the current bios and saved it. I tried to rewrite on it with a bios found on bios archive but it doesn't work.

Here is the information to help me get a dmi and a blank bios to remake a bios with a custom dmi:

Ideapad 3 15ADA05

MODEL name: 81w1

SN: PF3NTMCG

MTM: 81W1002GFR

Thanks

you have everything you need at post #1,and12...

[pblenov541]

Hello,


I flashed the bios of my lenovo 15ADA05 with the latest bios available on lenovo. Unfortunately, after the installation procedure with continuous sounds, I had a black screen and tried to restart. Then the computer remained with a black screen on reboot and the fan running normally. Impossible to launch the bios. So I dismantled the computer and tried flashing with cha341. I was able to read the current bios and saved it. I tried to rewrite on it with a bios found on bios archive but it doesn't work.

Here is the information to help me get a dmi and a blank bios to remake a bios with a custom dmi:

Ideapad 3 15ADA05

MODEL name: 81w1

SN: PF3NTMCG

MTM: 81W1002GFR

Thanks

[Sayidah]

thank you

[DanielDacko]

Hi All
I have an IdeaPad 3-17ADA05 -
Serial PF206XN8
Model 81W2 -
MTM 81W20056FR
that presented errors that seeme d to indicate onboard RAM issue.

I tried to disable the onboard ram following the instructions here [ solder-desolder resistors] but had no boot

I copied the DMI info to a downloaded Bios Bin as per this link
https://www.badcaps.net/forum/troubl...pt#post1214739
and got a boot ,but the system crashes with ACPI error after 5 minutes every time.
Attached is the original Bios Dump and the one that sort of worked
Thanks in advance

Here is latest bios with your DMI information, but the problem isn't in the bios, it's in the CPU soldering. Reflow the CPU. This is known issue on those thin Lenovo boards.

[peste]

Hi Peste,



Thanks a lot for you answer, I will check right away
Does anything needs to be changed in the bios if i disable the onboard ram via the resistors ? I could not be sure of it.

try the bios first. see what happens..you can use post #29 without DMI changes...

[alphaVII]

Hi Peste,

you have everything you need at post #29..
https://www.badcaps.net/forum/troubl...-15ada05/page3
for DMI information..
the bios from post # 29 is virgin, use the HxD program (it's free on the internet), enter both bios into the program (your laptop and the virgin one),
select that interval mentioned in both bios, copy the interval in your bios and pass it to the virgin bios (copy - paste)....and that's it...

Thanks a lot for you answer, I will check right away
Does anything needs to be changed in the bios if i disable the onboard ram via the resistors ? I could not be sure of it.

[peste]

Hi All
I have an IdeaPad 3-17ADA05 -
Serial PF206XN8
Model 81W2 -
MTM 81W20056FR
that presented errors that seeme d to indicate onboard RAM issue.

I tried to disable the onboard ram following the instructions here [ solder-desolder resistors] but had no boot

I copied the DMI info to a downloaded Bios Bin as per this link
https://www.badcaps.net/forum/troubl...pt#post1214739
and got a boot ,but the system crashes with ACPI error after 5 minutes every time.
Attached is the original Bios Dump and the one that sort of worked
Thanks in advance

you have everything you need at post #29..
https://www.badcaps.net/forum/troubl...-15ada05/page3
for DMI information..
the bios from post # 29 is virgin, use the HxD program (it's free on the internet), enter both bios into the program (your laptop and the virgin one),
select that interval mentioned in both bios, copy the interval in your bios and pass it to the virgin bios (copy - paste)....and that's it...

[alphaVII]

Hi All
I have an IdeaPad 3-17ADA05 -
Serial PF206XN8
Model 81W2 -
MTM 81W20056FR
that presented errors that seeme d to indicate onboard RAM issue.

I tried to disable the onboard ram following the instructions here [ solder-desolder resistors] but had no boot

I copied the DMI info to a downloaded Bios Bin as per this link
https://www.badcaps.net/forum/troubl...pt#post1214739
and got a boot ,but the system crashes with ACPI error after 5 minutes every time.
Attached is the original Bios Dump and the one that sort of worked
Thanks in advance

[lapfix]

Hi everyone,

Lenovo V15-ADA Laptop
Model name: 82C7
SN: PF2BW4BC
MTM: 82C70041LM
BIOS FROM LENOVO WEB PAGE: laptops and netbooks :: lenovo v series laptops :: v15 adacontentdetail - Lenovo Support US

I was updating my laptop's BIOS. In the middle of the process, the screen went black, and unfortunately I restarted the computer. After that, it won't turn on anymore. I've read that it can be recovered if I reflash it. I've tried several methods but haven't been able to get the correct BIOS file. This community (GUIDE-How-to-extract-BIOS-from-Lenovo-BIOS-Update-Package-such-as-ATCN37WW-exe - English Community - LENOVO COMMUNITY) explains how to extract the correct BIOS from the original file on the Lenovo website, but it didn't work for me. Hex files and assembly code aren't my thing.

Finally, I understand that if I get the basic BIOS file and run it from a USB drive, I have the possibility of recovering my laptop, just as mentioned in this guide (I-need-to-recovery-corrupted-BIOS-for-LENOVO-YOGA-500-15IHV - English Community - LENOVO COMMUNITY). One last question: The BIOS file must have an fd, bin, or some special extension to run correctly. Please help me.

AS mention in the guide : .bin
if you can't have .bin...than post your old dump and the serial and someone will help you

[malico]

Hi everyone,

Lenovo V15-ADA Laptop
Model name: 82C7
SN: PF2BW4BC
MTM: 82C70041LM
BIOS FROM LENOVO WEB PAGE: laptops and netbooks :: lenovo v series laptops :: v15 adacontentdetail - Lenovo Support US

I was updating my laptop's BIOS. In the middle of the process, the screen went black, and unfortunately I restarted the computer. After that, it won't turn on anymore. I've read that it can be recovered if I reflash it. I've tried several methods but haven't been able to get the correct BIOS file. This community (GUIDE-How-to-extract-BIOS-from-Lenovo-BIOS-Update-Package-such-as-ATCN37WW-exe - English Community - LENOVO COMMUNITY) explains how to extract the correct BIOS from the original file on the Lenovo website, but it didn't work for me. Hex files and assembly code aren't my thing.

Finally, I understand that if I get the basic BIOS file and run it from a USB drive, I have the possibility of recovering my laptop, just as mentioned in this guide (I-need-to-recovery-corrupted-BIOS-for-LENOVO-YOGA-500-15IHV - English Community - LENOVO COMMUNITY). One last question: The BIOS file must have an fd, bin, or some special extension to run correctly. Please help me.

[hoaca388]

Greetings to all,

i have my originall bios which is not working, Black Screen and No Fan only white Power Led ON
BIOS Dump : Lenovo V14-ADA
SN: PF2J0G92
MTM: 82C6006CSP
Model Name: 82C6

Can please someone help me?
Thanks in advance

V14-ADA Laptop (Lenovo) - Type 82C6

[infoner]

Greetings to all,

i have my originall bios which is not working, Black Screen and No Fan only white Power Led ON
BIOS Dump : Lenovo V14-ADA
SN: PF2J0G92
MTM: 82C6006CSP
Model Name: 82C6

Can please someone help me?
Thanks in advance

[Dantepg]

V15-ADA Laptop (Lenovo) - Type 82C7

Thank You but I have same problem. The monitor gives a backlight for a second and than everything goes black.

Thank you for your efort. Obviosly, there is a problem somewhere else.

[hoaca388]

V15-ADA Laptop (Lenovo) - Type 82C7

Machine Type Model
82C7008EYA

V15-ADA Laptop (Lenovo) - Type 82C7

[Dantepg]

post full name and model,

V15-ADA Laptop (Lenovo) - Type 82C7

Machine Type Model
82C7008EYA

[peste]

Hello Guys.

Can you help me with my BIos dump.
The laptop is turning on but have no POST only black screen
thank U

Serial : PF2PQK7B
FACTORY ID: JVHFC1
MTM: 82C7008EYA
MB GV451&GV551 NM-D151

old bios

post full name and model,