always posted up
https://www.badcaps.net/forum/troubl...17#post3522017
NEED BIOS FOR HP EliteBook 840 G5 6050a2945601-mb-a01
Collapse
X
-
-
-
Hi all some one of memebres modified my locked bios dump file for Hp 840 g5 i5 8 generation witH 32mb but after flasH te bios administrator password still tHere any Help emergency i post botH file locked original and tHe modified one sn 5CG92229D3Leave a comment:
-
-
Attached FilesLeave a comment:
-
hello
ineed bios hp 840 g5
on bios update bios damage
sn:
5cg9083b1q
Attached FilesLeave a comment:
-
-
hello,
i have elitebook 840r g4 stuck at finishing bios update loop,
any help please.
Leave a comment:
-
Hi all!
840 G5
SN:BCAOIZNL6D0KDA
COMPUTRO-6050A2945601
I need dump chip is located in field CN2700(U2703) but i didnt have this chip on motherboardLeave a comment:
-
Attached FilesLeave a comment:
-
-
The main bios file is corrupted, not the EC.Attached FilesLeave a comment:
-
Here is New Read file attached down.Attached FilesLeave a comment:
-
Reread chip again , main bios file's corrupted.Leave a comment:
-
Please this motherboard didn't start when i plugin the charger....it will blinking orange and white continuously
But I'm suspecting the EC file... Here is the attached file down
Hp 840 g5
Board number:COMPUTRO-6050A2945601-MB-A01(A1)
SN/ 5CG9056T3N
ProID/ 5SG12UPAttached FilesLeave a comment:
-
Attached FilesLeave a comment:
Related Topics
Collapse
-
by STKR123Greetings badcaps community,
I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.
Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.
I have a Elitebook 820 G1 and a Elitebook 840 G2 here.
These ask for a password when entering the BIOS, but boot just fine from the internal SSD.
I learned that desoldering...10-29-2024, 06:03 AM -
by macabookHello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
-
Channel: BIOS Requests ONLY!
07-24-2025, 02:17 PM -
by GuestHello,
I have an EliteBook 850 G5. After a Windows update, including a BIOS update, the notebook turns on, but the screen remains black, and the fans spin at high speed—nothing else happens.
I assume the BIOS update failed, so I searched for the BIOS chip.
I found a Winbond chip located between the RAM and the hard drive, which has a size of 32 MB.
However, the BIOS update available on HP's website is only 17 MB in size. I used the update version that was previously installed when the notebook was still working.
Can the corrupted...-
Channel: BIOS Requests ONLY!
-
-
by Vesko356First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...-
Channel: BIOS Requests ONLY!
-
-
by jbonavitaHi, my laptop wont boot at all
With original bios no POST, only LED lights
With alternative BIOS from model TP500LN (flashed via programmer) the notebook works again
Some issues
A- with bios from 500LN, it won't update from bios of model 500LA (from 500LN v203 to 500LA v300)
B- If updated from 500LN version 203 to 300, the battery stops being recognized
Things I tried
1- Update / clear ME: Took the non working bios, made a backup, and did this: https://www.badcaps.net/forum/troubl...theory/trouble...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Leave a comment: