PASSWRD Dell Latitude 5510 FDW50 LA-J381P

[Vesko356]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

Looks like it's time for new programmer. I think I go for TL866II as veryfication failed on both apps.

Yes TL866II is a good choice for the money.
Edit: I'll also suggest to get another adapter, for example:
https://www.badcaps.net/forum/showpo...&postcount=228

[SMDFlea]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

Looks like it's time for new programmer. I think I go for TL866II as veryfication failed on both apps.

Have you done the voltage mod,that can make it a bit more stable

https://www.youtube.com/watch?v=-ln3VIZKKaE
https://www.youtube.com/watch?v=HwnzzF645hA

[xxxxRobertxxxx]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

Yes TL866II is a good choice for the money.
Edit: I'll also suggest to get another adapter, for example:
https://www.badcaps.net/forum/showpo...&postcount=228

I just purchased TL866II and awaiting for delivery. I also ordered new adapter.
Thank you for all your help so far. I come back as soon as I receive programmer and read the chip properly.

[Vesko356]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

Have you done the voltage mod,that can make it a bit more stable

It is not a question of voltage modification, but of a specific unit in hand. This junk is unpredictable at work, I had a unit that unmodified worked very well even with 1.8v chips, and another piece (of junk) did the same problems as most of them do.
To take the risk of working with this on a laptop that costs more than £600 second hand is, to put it mildly unreasonable.

[Vesko356]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

I just purchased TL866II and awaiting for delivery. I also ordered new adapter.
Thank you for all your help so far. I come back as soon as I receive programmer and read the chip properly.

Good decision, the only reasonable one in this case. Send me a message when you're ready because I'm not always here, and I'll be happy to help you, we'll remove the password without any problems, don't worry.

[SMDFlea]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

It is not a question of voltage modification, but of a specific unit in hand. This junk is unpredictable at work, I had a unit that unmodified worked very well even with 1.8v chips, and another piece (of junk) did the same problems as most of them do.
To take the risk of working with this on a laptop that costs more than £600 second hand is, to put it mildly unreasonable.

I agree,but most folk will not pay for a better more expensive programmer. Sad buts thats how it is,and you know we`ll see a lot more corrupt backups being posted until another programmer is released thats just as cheap or cheaper but more reliable hardware and software wise.
.

[Vesko356]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

I agree,but most folk will not pay for a better more expensive programmer. Sad buts thats how it is,and you know we`ll see a lot more corrupt backups being posted until another programmer is released thats just as cheap or cheaper but more reliable hardware and software wise.
.

I completely agree, but in this case it is an expensive machine, and luckily I happened to be around and guessed what could happen, because the events could have turned out much worse - you know very well what a pain is to rebuild the bios for this particular machine, in addition all members here receive absolutely free of charge help to solve their problem thanks to our work and knowledge. Certainly from the money saved, at least they can afford to buy a better tool, which they will use in the future anyway.

[xxxxRobertxxxx]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

I just purchased TL866II and awaiting for delivery. I also ordered new adapter.
Thank you for all your help so far. I come back as soon as I receive programmer and read the chip properly.

Hi there,
I just received my new programmer today and couldn't wait any longer to read BIOS chip from my dell 5510. I think I've improved reading 100%. as the programmer does the really good job. I have done 3 undependent BIOS dumps as you have advised to do. Please have a look when you got a minute.

[Vesko356]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

Hi there,
I just received my new programmer today and couldn't wait any longer to read BIOS chip from my dell 5510. I think I've improved reading 100%. as the programmer does the really good job. I have done 3 undependent BIOS dumps as you have advised to do. Please have a look when you got a minute.

Indeed, completely different story this time - the new programmer works as it should.
Below is your unlocked file, at first boot enter the bios and write the Service Tag, then restart and you're good to go:

[xxxxRobertxxxx]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

Indeed, completely different story this time - the new programmer works as it should.
Below is your unlocked file, at first boot enter the bios and write the Service Tag, then restart and you're good to go:

Thank you very much for such a quick response. I will programm asap and let you know about result. Do I need to erase the chip before applying new BIOS or just overwrite it?

[Vesko356]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

Thank you very much for such a quick response. I will programm asap and let you know about result. Do I need to erase the chip before applying new BIOS or just overwrite it?

Old content must be erased first.

[xxxxRobertxxxx]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

Old content must be erased first.

Laptop is dead. I don't have time to reverse it now. I have a look tomorrow. do you have any suggestions?

[Vesko356]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

Laptop is dead. I don't have time to reverse it now. I have a look tomorrow. do you have any suggestions?

Should work, most probably you didn't programmed the chip properly (with verification) or didn't solder the chip as it should.
Try again.

https://www.badcaps.net/forum/showth...41#post1139941

[xxxxRobertxxxx]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

https://www.badcaps.net/forum/showth...41#post1139941

I just come back from work. I'm going to give it another try today and let you know. I'm going to desolder the chip, clean the pads, put new tin and reprogram the chip ones again. I'm sure that the report I have received from Xgpro stated that everything went right but I know that sometimes things are going wrong and the best way is to start from the begining and this is what i'm going to do. I also can confirm that verrification has been done after re-programming the chip and was showing success. I know it's sounds odd but this is what happend.
Thank you very much for all your support and your knowlage.

[Vesko356]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

I just come back from work. I'm going to give it another try today and let you know. I'm going to desolder the chip, clean the pads, put new tin and reprogram the chip ones again.

Exactly.

I'm sure that the report I have received from Xgpro stated that everything went right but I know that sometimes things are going wrong and the best way is to start from the begining and this is what i'm going to do. I also can confirm that verrification has been done after re-programming the chip and was showing success. I know it's sounds odd but this is what happend.
Thank you very much for all your support and your knowlage.

About the verification part - do not rely on a automatic verification process built into the software. I've said it before on another occasion, but here it is again for your information:

The safest method for verifying the contents is to read the chip after programming and compare the resulting file with the source. This eliminates any doubt, and you can proceed to soldering the chip to the board.
In this way, each step of the process is verified, and in the event of a problem, only the last step can be checked - namely the soldering to be inspected.
Otherwise, everything has to be done again from the beginning, because it is not certain at what stage the mistake was made.
This also applies to the initial reading of the chip with the original (containing the password) dump. Two or three content dumps need to be made that are compared to each other. If they are the same then it is certain that the content has been read correctly.

The procedures described above can take five minutes longer, but save five hours of headaches.

[kaseak]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

hi guys is possible to find a passwd for dell latitude 5510
security code :51N60F3-8FC8 THANKS

[Vesko356]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

hi guys is possible to find a passwd for dell latitude 5510
security code :51N60F3-8FC8 THANKS

https://www.badcaps.net/forum/showpo...&postcount=135

[JJong]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P



Please unlock my bios password.

[aldopc]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

[ATTACH]267679[/ATTACH]

Please unlock my bios password.

Try and comment the result please

[JJong]

Re: PASSWRD Dell Latitude 5510 FDW50 LA-J381P

Try and comment the result please

Power does not turn on.