help unlock passbios unowhy Y13G010S4EI

[pronto]

HI ALL I NEED TO UNLOCK PASSWORD OF THIS LAPTOP
Ile-de-France, August 2021
Model: Y13G011S4EI
S.N: IFP132051063

[hoaca388]

HI ALL I NEED TO UNLOCK PASSWORD OF THIS LAPTOP
Ile-de-France, August 2021
Model: Y13G011S4EI
S.N: IFP132051063

Unlocked

[pronto]

ITS WORKING THANK YOU SO MUCH
hoaca388

[pronto]

hi i have another pc have password on bios
Ile-de-France, August 2022
Model: Y13G012S4EI
S.N: IFP220036625

[pronto]

please help me for this password bios
Ile-de-France, August 2022
Model: Y13G012S4EI
S.N: IFP220036625

[volinakis]

hi i have another pc have password on bios
Ile-de-France, August 2022
Model: Y13G012S4EI
S.N: IFP220036625

here

[bin69]

Hello i need help with fixing my bios file and unlocking password.

Originally i wanted to unlock bios password in Unowhy Y13, but flash memory died during reading....
I've got the file but pradobly it got corrupted. Memory type: GD25LB64CVIG i've tried replacing it with: 25Q64BVSIG but no succes. Laptop didn't turn on, black screen no lights on besides red diode on motherboard when connecting charager.

Model: Y13G010S4EI
SN: IFP050034332
Production: December 2020
motherboard rev: EM_IG116_366B_ENE_V2.0


Also i've prdobly clean bios file that was located C:/Sortie_Parc/
Thanks for Your support

[volinakis]

Hello i need help with fixing my bios file and unlocking password.

Originally i wanted to unlock bios password in Unowhy Y13, but flash memory died during reading....
I've got the file but pradobly it got corrupted. Memory type: GD25LB64CVIG i've tried replacing it with: 25Q64BVSIG but no succes. Laptop didn't turn on, black screen no lights on besides red diode on motherboard when connecting charager.

Model: Y13G010S4EI
SN: IFP050034332
Production: December 2020
motherboard rev: EM_IG116_366B_ENE_V2.0


Also i've prdobly clean bios file that was located C:/Sortie_Parc/
Thanks for Your support

try this one

[bin69]

try this one

Thx for helping me Bro

I've tried but on windbond chip and its still bricked, but i think its cuz of bad memory type factory flash is working on 1.8V and the one i've used (2.7 to 3.6V power supply copied from datasheet) so it might work i just need to find replaacement for GD25LB64CVIG cuz its hard to get one besides alii expres but it can be fake. Maybe U know some replacement for that flash that will be avalible normally?

Also i've checked Voltages and after i click turn on button there is 1,8V on bios VCC pin, and the weird thing is also 1,8V on all bios pins besides VSS, i think it may be like that cuz of too low voltage to this flash.

[volinakis]

Thx for helping me Bro

I've tried but on windbond chip and its still bricked, but i think its cuz of bad memory type factory flash is working on 1.8V and the one i've used (2.7 to 3.6V power supply copied from datasheet) so it might work i just need to find replaacement for GD25LB64CVIG cuz its hard to get one besides alii expres but it can be fake. Maybe U know some replacement for that flash that will be avalible normally?

Also i've checked Voltages and after i click turn on button there is 1,8V on bios VCC pin, and the weird thing is also 1,8V on all bios pins besides VSS, i think it may be like that cuz of too low voltage to this flash.

w25q64fw

[bin69]

w25q64fw

thx U're lifesaver
I've ordered 3 of them, they will ship it in 2 days and i will let U know the results

[bin69]

I've tested it today and its still bricked. Also there is stil 1,8V on 7/8 pins of this flash after turning it on. Its normal when flash is corrupt or thats an electrical fault?

[konare]

Hello, I have a machine in the Ile-de-France region that has an administrator code in the BIOS. I saved the dump and searched for amitsetup in HxD. I deleted the section, but the code is still there.
Model: y13 (2022)
EM_IG116_200B_ENE_TI_V1.0
S\N: IFP217002771 Thank you.

[SMDFlea]

Look in other places https://www.badcaps.net/forum/troubl...12#post3705012

[volinakis]

Hello, I have a machine in the Ile-de-France region that has an administrator code in the BIOS. I saved the dump and searched for amitsetup in HxD. I deleted the section, but the code is still there.
Model: y13 (2022)
EM_IG116_200B_ENE_TI_V1.0
S\N: IFP217002771 Thank you.

your dump has to have 8.388.608 bytes and yours is 8.390.144 bytes. Choose the right chipset on your programmer software. And post original dump, not your modified dump.

[konare]

dump original

[volinakis]

dump original

I don't see anything in AMITSESetup entry. Anyway, use this file.

[konare]

Hello, I just tried, no display.

[volinakis]

Hello, I just tried, no display.

check soldering, is a factory bios.

[konare]

I checked all the pins are connected, I put my old bios and the machine worked only it is locked I don't understand

[volinakis]

I checked all the pins are connected, I put my old bios and the machine worked only it is locked I don't understand

try this one. Are you sure your model is 2022?