might be that some models have different bios, or we don't know how to change the file correct, cuz i've tried also everything....

Did U tried changing serial number to Yours in the file U were flashing? maybe serial has to be same as serial in KBC? im having same problem in Y13 2020 :P

I've tested it today and its still bricked. Also there is stil 1,8V on 7/8 pins of this flash after turning it on. Its normal when flash is corrupt or thats an electrical fault?

thx U're lifesaver
I've ordered 3 of them, they will ship it in 2 days and i will let U know the results ...

Thx for helping me Bro

I've tried but on windbond chip and its still bricked, but i think its cuz of bad memory type factory flash is working on 1.8V and the one i've used (2.7 to 3.6V power supply copied from datasheet) so it might work i just need to find replaacement for GD25LB64CVIG cuz its hard to get one besides alii expres but it can be fake. Maybe U know some replacement for that flash that will be avalible normally?

Also i've checked Voltages and after i click turn on button there is 1,8V on bios VCC pin, and the weird thing is also 1,8V on all bios pins besides...

Hello i need help with fixing my bios file and unlocking password.

Originally i wanted to unlock bios password in Unowhy Y13, but flash memory died during reading....
I've got the file but pradobly it got corrupted. Memory type: GD25LB64CVIG i've tried replacing it with: 25Q64BVSIG but no succes. Laptop didn't turn on, black screen no lights on besides red diode on motherboard when connecting charager.

Model: Y13G010S4EI
SN: IFP050034332
Production: December 2020
motherboard rev: EM_IG116_366B_ENE_V2.0


Also i've prdobly clean...