Hp 15-ra000nk (15-ra0xx) clean me.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • lapfix
    Badcaps Legend
    • Mar 2020
    • 2715
    • my workshop
    #1

    Hp 15-ra000nk (15-ra0xx) clean me.

    Hello my friends.This lab comes no power , someone before me mess with the bios , try to clean me but find this error : found unidentifiable intel engine firmware what mean : This usually indicates that something went wrong during dumping or similar ( plutomaniac).

    So can someone give help , thank you
    Attached Files
    Last edited by SMDFlea; 05-04-2021, 07:05 AM.
    Tags: None
    • lapfix
      Badcaps Legend
      • Mar 2020
      • 2715
      • my workshop
      #2
      Re: Hp 15 clean me.

      Is my dmi info adress is this : 1FC080-1FD08F !

        Comment

        • SMDFlea
          Super Moderator
          • Jan 2018
          • 20709
          • UK
          #3
          Re: Hp 15 clean me.

          Do you have the full laptop model number
          All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

            Comment

            • lapfix
              Badcaps Legend
              • Mar 2020
              • 2715
              • my workshop
              #4
              Re: Hp 15 clean me.

              yes , and i successfully download the new bios ver F.67 Rev.A.
              the lap work , only at external ; i have a doubt about a screen too ( broken)
              and the habituel message : manufacturing programing mode is unlock mode.
              that's why i m asking about the DMI.

                Comment

                • SMDFlea
                  Super Moderator
                  • Jan 2018
                  • 20709
                  • UK
                  #5
                  Re: Hp 15-ra000nk (15-ra0xx) clean me.

                  bios + dmi .
                  Attached Files
                  Last edited by SMDFlea; 05-04-2021, 11:25 AM.
                  All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

                    Comment

                    • lapfix
                      Badcaps Legend
                      • Mar 2020
                      • 2715
                      • my workshop
                      #6
                      Re: Hp 15-ra000nk (15-ra0xx) clean me.

                      Tahnk you SMDflea for your precious helps

                      Your bios is perfect with all my DMI present , only lap ask me at start : manufacturing programming mode is in unlock mode ...and i have a tool to fix it...thank you again

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • DynaxSC
                          Activation of Management Engine after exchange Z590 chipset - ASUS PRIME Z590M-PLUS
                          by DynaxSC
                          Hi, i have an ASUS PRIME Z590M-PLUS board, which had an shorted Z590 chipset. I have succesfully exchanged the chipset to a factory new one, however there is a serious problem with the Intel Management Engine (later on: ME) not beeing activated after the chipset device replacement.

                          For lower chipset families (on ASUS boards) it worked to program the oldest bios version into the SPI rom, and the bios had activated the Management Engine itself by default - there was a message on the screen prior booting - "BIOS is updating Management Engine ..... . Do not shut down to prevent...
                          06-10-2023, 11:30 AM
                        • anton brunner
                          Having a hard time dumping BIOS - Lenovo Ideapad Duet 3 (11IAN8)
                          by anton brunner
                          Hello everyone,

                          I'm having a hard time dumping the BIOS of a Lenovo Ideapad Duet 3 (11IAN8). The chip is a Winbond W25R256JVEN, directly soldered to the board in a WSON8 package.

                          Since there are lots of tiny components near the chip, I was hesitant to desolder it using hot air. Instead, I soldered thin wires directly to the chip's pads and connected them to a CH341A programmer (photos attached).

                          The chip is detected correctly in both NeoProgrammer and ASProgrammer, but I'm unable to get a consistent dump. I've tried over 15 times — shortened the wires to...
                          2 Photos
                          05-15-2025, 01:01 AM
                        • bk304
                          Dumping BIOS contents
                          by bk304
                          Hello All,
                          This is my first post. Please let me know if I am posting in the wrong place.

                          Is there a way of dumping BIOS contents without hooking up to the chip? I have seen an older program that does this but it would not run on Windows 11. I don't know if this is something that only works on legacy bios or can also work in Windows UEFI....
                          01-27-2025, 12:37 PM
                        • jgusta
                          Help Identifying Component Q2 - Miller d302K 3+12 Diesel Engine Driven Welder
                          by jgusta
                          Hello, I am trying to identify a damaged component on a Miller d302K 3+12 Diesel Engine Driven Welder Voltage Regulator board. The board itself is labeled Assembly # 214954. The board is modular but can't find an easy replacement.

                          There is a component that is damaged that I cannot identify due to it being damaged. It is marked as Q2 on the board. I've included a link to the technical manual, but it doesn't give much detail, at least none that I can understand.

                          Can anyone could help me identify this component? I've tried to get as good of a picture of it as I can.
                          ...
                          Miller Assembly # 214945b
                          4 Photos
                          09-21-2024, 12:03 AM
                        • DynaxSC
                          GIGABYTE X299 AORUS ULTRA GAMING - SATA PORTS 4-7 NOT WORKING ???
                          by DynaxSC
                          Hi,

                          I have the above mentioned bord after repair, which was related to a lot of missing smd devices on the back of the board.
                          There were almost 20 devices missing, caps, resistors and some diodes/mosfets.
                          The board is generally working now, all PCIe ports are working, Windows installs normally.

                          However I have a problem with SATA ports 4-7 (the board has 8 SATA ports) - disks are not beeing recognized by the BIOS neither by Windows (which is usually normal in case BIOS does not recognize them).
                          The SATA 4-7 driver network is quite simple chipset<->buffers/drivers<->SATA...
                          03-10-2025, 12:27 PM
                        • Loading...
                        • No more items.
                        Working...