Getac V110 Bios Needed.

[peste]

Hello, I have a Getac V110
S/N: RP403V0379

I don't know how to make a BIOS dump , and I need the BIOS password ,

It will be much appreciated

my best regards,

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

[itdgme]

Hello, I have a Getac V110
S/N: RP403V0379

I don't know how to make a BIOS dump , and I need the BIOS password ,

It will be much appreciated

my best regards,

[SMDFlea]

Hi everybody.

i found a Winbond Chip on the second PCB under the Mainboard, next to the USB-CPort. Anybody knows something about that ? is that a second BIOS Chip ?

Check the part number on top of the chip and google it, look at the datasheet, if the size is only 1MB it is probably for USB-C firmware, leave it alone.

[MettyWurst995]

Hi everybody.

i found a Winbond Chip on the second PCB under the Mainboard, next to the USB-CPort. Anybody knows something about that ? is that a second BIOS Chip ?

[MettyWurst995]

Send to you

Thanks. but it still have the same issues. 😓
tried to flash it with neoprogrammer and Asprogrammer.

[spurki]

AAAC when i try to install windows 10 uefi he blocks ...i put win 7 on legacy and works fine...i can put another bios from other laptop or? or it is possible to make a clean bios? i attach again maybe i have luck...maybe is corupted on uefi if is possibile this...

seems to be a customized bios AAAC , i can`t make any update to bios..say don`t match...and at first round when say version at getac update bios software say V.... GMBH...and i can`t do any update to bios..and still same problem,after finish install windows is ok at first shut down and power up the mouse move alone...win7 works fine , problem is with 10-11 , if i modify in bios and put compatibility from win 8/10 to win 7 works fine no mouse jump...

[spurki]

AAAC when i try to install windows 10 uefi he blocks ...i put win 7 on legacy and works fine...i can put another bios from other laptop or? or it is possible to make a clean bios? i attach again maybe i have luck...maybe is corupted on uefi if is possibile this...

[spurki]

In a previous post dated 10-27-2024 I have extracted the password on one of your Getac V110G4 computers (password was hashed), password is "dbihg", which also happens to be the same exact password on the 4 bios dumps that you uploaded. Maybe the problem is with your programmer, and you could have also used the "dbihg" password I've posted almost 6 weeks ago.

Hi AAAC i just want to say that you have right that`s the password thank you again for help!

[minhdigital]

Sorry, forgot that.

Serial number is RL103V0146

Send to you

[MettyWurst995]

right, uppercase mistake, my wrong

however I extended the serach and I removed a sticky soft plastic shield under which I found a larger Winbond chip covered with varnish, and it's labelled BIOS on the motherboard print
marks are non readable, it is however a larger chip then the one I identified erroneously
I'm gonna have to find the proper clip for this one

Thanks

You can use a Pogo Connector. Versions for 5x6 and 8x6 are availlable. I found mine on amazon and it worked just fine for my V110G5

[MettyWurst995]

Sorry, forgot that.

Serial number is RL103V0146

[hoaca388]

Hi everyone,

this is my first try working on a bios chip.
i have a Getac V110 G5 with a bios problem (i guess). i was updating the firmware through Windows Update on Win11 and then nothing. Only keyboard lights and display backlight.
so i hope i can revive that computer.
thanks in advance
Sorry, my English is not the best, i am from Germany

Serial number ? This is forums' rules.

[MettyWurst995]

Hi everyone,

this is my first try working on a bios chip.
i have a Getac V110 G5 with a bios problem (i guess). i was updating the firmware through Windows Update on Win11 and then nothing. Only keyboard lights and display backlight.
so i hope i can revive that computer.
Serial number is RL103V0146
thanks in advance
Sorry, my English is not the best, i am from Germany

[viklander]

Hi

it's an 8*6 WSON chip
I have get a programing probe (maybye I'll enjoya fast delivery ...)
I'll get back here soon I'll have get it

Thks

[hardware1]

right, uppercase mistake, my wrong

however I extended the serach and I removed a sticky soft plastic shield under which I found a larger Winbond chip covered with varnish, and it's labelled BIOS on the motherboard print
marks are non readable, it is however a larger chip then the one I identified erroneously
I'm gonna have to find the proper clip for this one

Thanks

It could be in WSON package (8*6 or 6*5). You can send a clear image for the chip to let us help you more.

[viklander]

8Mb means 8 Megabit = 1MB means 1 Megabyte.

right, uppercase mistake, my wrong

however I extended the serach and I removed a sticky soft plastic shield under which I found a larger Winbond chip covered with varnish, and it's labelled BIOS on the motherboard print
marks are non readable, it is however a larger chip then the one I identified erroneously
I'm gonna have to find the proper clip for this one

Thanks

[hardware1]

Hi, thanks a lot for your answer, but according to https://www.winbond.com/hq/product/c...artNo=W25Q80DV is an 8MB chip. Or am I wrong ?

8Mb means 8 Megabit = 1MB means 1 Megabyte.

[viklander]

Wrong chip, the 25Q80DVSIG is 1MB. Flash your backup back to that chip and go looking for the real bios chip

Hi, thanks a lot for your answer, but according to https://www.winbond.com/hq/product/c...artNo=W25Q80DV is an 8MB chip. Or am I wrong ?

It is true however that IMSprog identifies the chip as a 1 MB

And I examined with great care the motherbord but I couldn't find any Windond / EEPROM chip

Would you suggest me to entirely remove the motherboard to see if it's on the other face ?

TIA, with regards

[SMDFlea]

Hello

I own three GETAC V110 V6, all three with a locked BIOS (BIOS password set and lost).

opened it and located the Winbond 25Q80DVSIG eeprom and was able to read the BIOS with a CH341/IMSprog (proper modification applied to the CH341 to have the right voltage on the entire chip)

so I decided to save it and write a fresh BIOS downloaded from the GETAC site (V110G6_R108.bin) and flash it straight to the EEPROM

Wrong chip, the 25Q80DVSIG is 1MB. Flash your backup back to that chip and go looking for the real bios chip

[viklander]

Hello

I own three GETAC V110 V6, all three with a locked BIOS (BIOS password set and lost).

There is no OS on the HDD and no boot is allowed on external devices.

I'd wish to get those 3 machine alive, again, and at the very best understand how the whole damn thing works.

What I did on one system :

opened it and located the Winbond 25Q80DVSIG eeprom and was able to read the BIOS with a CH341/IMSprog (proper modification applied to the CH341 to have the right voltage on the entire chip)

so I decided to save it and write a fresh BIOS downloaded from the GETAC site (V110G6_R108.bin) and flash it straight to the EEPROM

powered the laptop back, tried to enter the BIOS and got prompted for a password again

I tried to read the original BIOS with binwalk and an Hex editor but didn't succeed in finding anything and in the various tests I made, I lost the backup of the original BIOS (yeah, I know, this sucks)

nonetheless I decided to erase the Windond chip and see what this would do, it changed nothin : BIOS passwd prompt, again

so there is something somewhere such like the system setup utility whish is stored somewhere else and this is where I'm stuck for I had a close look of the motherboard and couldn't find a plausible candidate

any hint or help will be grealty appreciated

regards

*** EDITED ***

I was able to dd a bootable Windows 10 on the machine, so the passwd is still here but I can run some stuff from here - unfortunately the secure boot was activated so no Linux, Windows only