lotus13-tsp rev 1.0 this laptop keeps on rebooting . as soon as the samsung appears it turn off and on. please can someone gets me its bios or repair its dump. is been attached.
-
-
Re: lotus13-tsp rev 1.0
The attached dump is corrupt. What programmer are you using ? ,some have an option to slow the programmer speed down. Make another backup .Last edited by SMDFlea; 02-22-2021, 09:51 AM. -
lenovo ideapad 700-15ISK bios needed
lenovo ideapad 700-15ISK part number (lol skl mb) bios needed. please help repair the dump for meLast edited by SMDFlea; 02-23-2021, 09:07 AM.Comment
-
Re: lenovo ideapad 700-15ISK bios needed
Different machine,different bios, Off-topic and Bios removed.Start a new thread or use the forum search, a bios may already have been posted - https://www.badcaps.net/forum/showth...ight=700-15ISK
.Last edited by SMDFlea; 02-23-2021, 09:18 AM.Comment
-
Hi everyone,
I’m trying to bring a LG SK10Y soundbar back to life. Currently it is stuck in the “PLEASE WAIT” loop.
My conclusion so far is that something fails to boot fully, but it does start via eARC and can play perfectly good sound until watchdog shuts it down.
After dumping NAND with a T48 programmer, extracting with binwalk and exploring with Ghidra I think:- Kernel B is present, but no Kernel A. Is that normal?
- SquashFS A/B are present
- Bootloader is present
- UBI region is completely empty (only volume 0 / layout volume exists)
- No system.cfg,
11-13-2025, 03:19 PM -
Hi guys!
I have this laptop which is turning on but has no image. I have attached the bios dump but I can't seem to find a working one. I also read a similar thread mentioning WBT.exe v314 but no instructions on how to use that.
Can you please help me with a working binary that includes the DMI info from my dump? Or kick me to the right direction to try and add the DMI section myself? I used HxD on my dump and found the serial on multiple places so I am not sure what to copy.
thank you very much in advance!
br,
george... -
anyone have have dell OptiPlex 3000 Tower bios
PC not turnd on all voltages ok. if i press power button a orange light just blink inside power button
MB DETAILS - D12 ENTRY Opti3/Ins/Vos/CM
OXCW8$FA
212023-1
SERVICE TAG - G6FYVQ3
I HAVE OLD DUMP ATTACHED WITH THIS POST... -
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...
Comment