hp 450 g7 password

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • floflo29200
    replied
    Re: hp 450 g7

    Originally posted by shabi
    cleared
    Thank you shabi but nope, the admin password prompt is already present with your proposal.

    Leave a comment:


  • peste
    replied
    Re: hp 450 g7

    Originally posted by floflo29200
    Thank you peste. Is it the main or ec dump?
    the one you posted on ... the other one stays the same ..

    Leave a comment:


  • floflo29200
    replied
    Re: hp 450 g7

    Originally posted by peste
    try this..
    Thank you peste. Is it the main or ec dump?

    Leave a comment:


  • shabi
    replied
    Re: hp 450 g7

    Originally posted by floflo29200
    hello guys,

    could you please help me to unlock this probook 450 g7 bin file?

    Regards
    cleared
    Attached Files

    Leave a comment:


  • floflo29200
    replied
    Re: hp 450 g7

    Originally posted by floflo29200
    Hello guys,

    Could you please help me to unlock this probook 450 g7 bin file?

    Regards
    This dump file is from EC W25Q128JV eeprom chip ... don't know if it's the right eeprom to modify.

    Leave a comment:


  • peste
    replied
    Re: hp 450 g7

    Originally posted by floflo29200
    Hello, for information i made the same changes that qayyum786 proposed to electroelef (see vimdiff hex capture) but without success. Bios starts with "firmware corruption detected" prompt message and recover to previous state : status quo.
    try this..
    Attached Files

    Leave a comment:


  • floflo29200
    replied
    Re: hp 450 g7

    Hello, for information i made the same changes that qayyum786 proposed to electroelef (see vimdiff hex capture) but without success. Bios starts with "firmware corruption detected" prompt message and recover to previous state : status quo.
    Attached Files

    Leave a comment:


  • floflo29200
    replied
    Re: hp 450 g7

    Hello guys,

    Could you please help me to unlock this probook 450 g7 bin file?

    Regards
    Attached Files

    Leave a comment:


  • qayyum786
    replied
    Re: hp 450 g7

    Originally posted by meroo2041
    please need bios for hp 14s-dq1003nx
    i cant write new post
    post your backup dump

    Leave a comment:


  • meroo2041
    replied
    Re: hp 450 g7

    please need bios for hp 14s-dq1003nx
    i cant write new post

    Leave a comment:


  • qayyum786
    replied
    Re: hp 450 g7

    try
    Attached Files

    Leave a comment:


  • electroelef
    replied
    hp 450 g7

    need password removal on this please
    Attached Files

    Leave a comment:


  • qayyum786
    replied
    Re: HP 450 g7 DA0X8MMB6D0 rev d unpassword

    try
    Attached Files

    Leave a comment:


  • nasirahmad52
    started a topic hp 450 g7 password

    hp 450 g7 password

    HP 450 g7 DA0X8MMB6D0 rev d unpassword
    Attached Files

Related Topics

Collapse

  • AppleLover123
    Lenovo Yoga X380 22LH Supervisor Password removal
    by AppleLover123
    Hey guys,

    have a laptop here that has a supervisor Password (dump in Attachements).
    Before i write the Serial NR.etc i wanted to say that strangely after flashing with 3 different Bios dumps and one from lenovos site
    the laptop works but everytime it wants me to type a supervisor password i never set.
    I thought the supervisor password is stuck in the ec bios but no it isn't either because after replacing the ec chip from one of another board it still has the supervisor password.
    Anyway i wanted to ask what of the two chips is the ec bios because on the left...
    04-17-2025, 03:42 PM
  • mferna14
    Password removal on MacBook Pro A2159
    by mferna14
    Hi friends., I am working on MacBook Pro A2159 touchbar 2019. The old logic board was liquid spilled so I ordered another logic board from AE. Received it & all worked fine till I got to the Chinese login screen where the login screen password tobe entered. I tried to reset the password but it again gave me options which I do not know about the Apple ID. I formatted the onboard SSD. & wanted to change the startup boot sequence but in order to change it, again the password is needed for that too. Is there a way to get rid of this password?? The seller has not replied back past 2 days, how...
    05-13-2025, 04:16 PM
  • Badpatch02
    Thinkpad X380 Yoga supervisor password removal + Intel ME removal question
    by Badpatch02
    Hi all, I'm new here, a few words about myself: CS student, interested in hardware stuff too - tinkering my whole life but with practically no experience when it comes to firmware "hacking".

    So I have this X380 Yoga with a supervisor password in place and before doing anything stupid I figured I'd rather ask.
    I plan on using the tool from this thread: https://www.badcaps.net/forum/troubl...password-remov...
    11-30-2024, 05:22 AM
  • Johnny h
    Asus M7600R BIOS Password request/removal
    by Johnny h
    Hello,

    I'm hoping someone can assist me.
    I have an Asus Vivobook 16x Pro OLED laptop which has a BIOS password, and I can't seem to find it.
    It still boots into Windows (boots from whatever SSD is installed but not from USB).

    The model number is M7600R and serial number is N8N0CX03H71131C.

    I tried AMITSESetup Decryptor but the password I got doesn't make sense (it's got a line break and special characters).
    I also tried to use *************** MOD EDIT ,redacted************** and it also gave me the funny password of
    Code:
    tmNx\'=QJQ
    ...
    04-10-2024, 06:13 AM
  • coolshrimp
    T14s - MEC-1663 - Jtag - Pinout - Bios Password Removal
    by coolshrimp
    Here is all the info you should need to remove bios password from your same model or one with an MEC-Chip and also write back the config data

    T14s - MEC-1663 - Jtag - Pinout - Bios Password Removal

    See Diagram for Wiring.

    Use MEC-1633#ISP on your RT809h
    This is same Jtag pinout and method for T490S/X390
    (But your R/W 10K Resistor Location May In a Different Location)


    MEC-Chips Store Bios Password In a Secure Un-Editable Area

    Following steps clear that secure area to re-initialize itself to default (Blank)
    ...
    10-24-2022, 12:18 AM
  • Loading...
  • No more items.
Working...