LA-G07AP Need bios dump
Collapse
X
-
-
Re: LA-G07AP Need bios dump
Hi everyone,
i have this laptop hp 15 d0129nl with power on and black screen, the board is la-g07ap rev. 1
Seems bios corrupted, can someone help me to clean it?
thanks very wellAttached FilesLeave a comment:
-
Re: LA-G07AP Need bios dump
Hello friend, which programmer did you use? The BIOS chip is the qh64ahig !!!
I have the TL866CS.Leave a comment:
-
Re: LA-G07AP Need bios dump
Try the code generator here: https://docs.google.com/spreadsheets...it?usp=sharing
I think this model stored the pass in the KBC not in the bios.Leave a comment:
-
Re: LA-G07AP Need bios dump
Do you have a code on the screen i xxxxxxxLeave a comment:
-
Leave a comment:
-
Re: LA-G07AP Need bios dump
this is with password. please clean it if you can. really thanksAttached FilesLast edited by cinek9108; 05-26-2020, 02:24 AM.Leave a comment:
-
Re: LA-G07AP Need bios dump
Better you post your dump here.If the bios from Peste works but he got a bios password we can clear itLeave a comment:
-
Re: LA-G07AP Need bios dump
it is ok but with admin password. model 15-da0100nu, apu sr342, gpu n16v-gmr1-s-a2, kbc kb9022q, bios chip 25q64Leave a comment:
-
Re: LA-G07AP Need bios dump
https://www.alisaler.com/hp-15-da019...g07ap-bios-ec/
if it is not ok give more details to the laptop ... HP? model? post the original bios here ..Leave a comment:
-
LA-G07AP Need bios dump
Hi. i'm looking for bios dump for LA-G07AP. help pleaseTags: None
Related Topics
Collapse
-
by Habble7The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...-
Channel: Troubleshooting Computer Displays
-
-
by DynaxSCHi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
by grimacelordThis laptop is the same laptop I was working on in this thread and I wasn't sure if I should post a new topic or post in that thread because I already solved the issue that thread was discussing and this is a completely different issue although it is dealing with the same laptop. I decided to make a new thread since it's a new issue, but please move if I made a mistake.
Motherboard model number: DA0PAMB46A1 REV: A
Secondary motherboard model number: 0PAB
SKU: 685K4UA
Serial number is: 5CD3223BJP
Recently reflashed this laptop with latest BIOS and once...-
Channel: BIOS Requests ONLY!
-
-
by DynaxSCHi,
I need a BIOS dump for MSI Z590 PRO WIFI from a real physical board, along with MAC address and serial no.
It must be a dump from a physical board, as it contains personalized data eg. MAC Address, UUID, Serial no.
I have a board which has lost the BIOS contents, I have the MAC and serial to this board, and need to insert it into the another BIOS image. To do it, I need to have a real image from a real board, as the images from the MSI site are without this data. The only way to find where MAC/UUID/Serial is located in the BIOS is to have a bios...-
Channel: BIOS & Schematic Requests!
11-06-2022, 05:22 PM -
-
Hi everyone,
I'm trying to recover a Fujitsu Lifebook E5513 (most likely 2023 model) that was bricked during a BIOS update. The update was interrupted (probably due to power loss), and now the laptop is stuck in a boot loop showing "PBB rollback" / "SBB rollback" messages.
BIOS access (F2) and Boot Menu (F12) are no longer possible – the system instantly reboots after the rollback messages.
I extracted the official BIOS update package from Fujitsu (contains FJNB2FD.CAP, ~18.7 MB) and tried tools like UEFIExtract, but it seems to only contain...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Leave a comment: