thanks
hedwig-6050a2993001-mb-a03 do have bios
Collapse
X
-
HEDWIG-6050A2993001-MB-A03(A3) No Display
SN:5CG00836XN
PLEASE HELP ME WITH THIS BIOS
Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
have u fixed it? because i have same problemRe: hedwig-6050a2993001-mb-a03 do have bios
1st status is blinking capslock ..after flashing good bin no blinking but still no display current draw is 0.110a with or without ram ..cpu is in normal temp. voltage coil check near ram i got 1.2v,1.8 and 5v is present ..voltage check in ram capacitor i got 1.2 and 5v.. i dont have schematic or brv.. thank sirComment
Related Topics
Collapse
-
by piratiHello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder...-
Channel: BIOS Requests ONLY!
-
-
by Vesko356First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...-
Channel: BIOS Requests ONLY!
-
-
by grimacelordHello,
I am not sure if someone can help me with this or not. I am hoping someone can.
I have a client who brought me a Foscam C1 V2 IP Camera after they disconnected power to the device during the middle of a firmware upgrade because they got impatient and thought it was frozen, so they disconnected the power despite a warning message telling them not to do that. Currently the device shows the power LED when connected to power, but it doesn't complete it's boot process and the camera is inaccessible on the network through Foscam's App for Android or the Windows application....11-12-2025, 10:23 AM -
by WahazHello,
I have a Lenovo Thinkbook 15 G2 ITL i5 Laptop (serial number: MP2BFZEF) that when I turn it on, the led on the power button lights up for 5 seconds, then goes out. There's no display and nothing happens.
So I thought it was a Bios problem.
I found 3 bios chips on the board, which I read with a bios programmer: two XMC model bios chips and a Winbond model bios chip. Each XMC model bios chip has two partitions named XM25QH128A [3.3V] and XT25F128A [3.3V]. And the Winbond model bios chip has three partitions named W25Q80BL 3.3V, W25Q80xV 3.3V and W25Q80DV 3.3V....-
Channel: BIOS Requests ONLY!
-
-
by macabookHello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
-
Channel: BIOS Requests ONLY!
07-24-2025, 02:17 PM - Loading...
- No more items.
Comment