-
-
Re: Panasonic CF-19RDRAHHD password
Tested 1 , only 1 green light on when connecting power but when switching on the laptop wont power on anymore staying with the same green led on and do nothing,
Tested 2 , same as test1 , the chip is still ok , programer autodectecting ic, to be sure that chip is soldered good i used solder iron, testing 3
Tested 3, found that when connecting power cord the light on , keep pressing power button the light goes off , so i put the chip off and connected power cord and its the some result, green light on = power on but no image , the laptop do nothing, testing 4
Tested 4, some as 1,2,3 . Laptop power on when the power cord plugged but no image, when pressing power button for 4 seconds the green light goes off.
Comment
-
Re: Panasonic CF-19RDRAHHD password
Now flashing spbios patched
Tested laptop on , and asking for password
Comment
-
Re: Panasonic CF-19RDRAHHD password
Also try my file..Comment
-
-
Re: Panasonic CF-19RDRAHHD password
check if u get HDD password instead...better to remove hdd/ssd first and reflashComment
-
Re: Panasonic CF-19RDRAHHD password
did u tried my dump?Comment
-
-
Re: Panasonic CF-19RDRAHHD password
good!Comment
-
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hello
I removed the BIOS password thanks to the help of one of the friends of this forum.
https://www.badcaps.net/forum/troubl...61#post3637661
The batch from which the password was removed works correctly but... after some time, the BIOS password is set again, I reprogrammed the batch with the removed password, it's ok, there is no password, I set my password, ok, I can enter the BIOS with my password but... -
Hello,
I'm using TONGFANG "GM7TG7P" model laptop for over 3 years and i'm entering the same bios administrator password everyday. My laptop has Aptio BIOS (American Megatrends, AMI).
But today it's not accepting my password. I'm %100 sure i'm entering the correct password.
I'm trying to reset my bios without success.
I tried :
-I removed the BIOS battery and main battery. Waited for a long time but it didn't work. They already stated in the user manual that the password will not be reset even if the batteries... -
Hello everyone, I come here to tell you my problem regarding the power-on password. It is not a bios reset demand, and i can't have any access to windows. This is the bios and power-on password that is blocking all other things.
My Omen 15-dh0052nf purchased second-hand was configured with the bios password upon purchase (very simple password :P ).
Having decided to sell it in order to get something more powerful, I reset all BIOS settings and set a blank administrator password. But the power-on password cannot be changed to a blank one so I let the actual password set.... -
Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
Comment