bios lenovo ideapad 330-15ikb
Collapse
X
-
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
---------------------------------------------------------------------------------------------------------------------------------------------------------- -
Re: bios lenovo ideapad 330-15ikb
pls repair my bios dump
lenovo 330-15ikb
eg521 eg522 ez511 eg721 nm-b452
problem- No DisplayAttached FilesComment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Re: bios lenovo ideapad 330-15ikb
this isworking bios faster boot
thanks adminAttached FilesComment
-
Re: bios lenovo ideapad 330-15ikb
Hello everybody.
I'm in need of help with a Lenovo 330-15IKB-81FE-NM-B452. Mosfet PQ1005 toasted and PQ1001 open and I have already replaced them. Notebook now turns on when plugging in A/C, turns off and on again with 70mA, no video and cooler running at maximum after staying on. (continuous behavior when connecting A/C source). PL1001 without voltage, everything else ok!
There was oxidation on the PU901 pads, it was removed and resoldered.
Attached BIOS for analysis and possible ME cleanup.
Thanks to anyone who can help..Last edited by Inforprint; 05-08-2022, 03:36 AM.Comment
-
Re: bios lenovo ideapad 330-15ikb
Hello everybody.
I'm in need of some help.
I am repairing a Lenovo 330-15IKB-81FE-NM-B452. I had a toasted PQ1005 mosfet and an open PQ1001, they were replaced and the notebook now turns on when plugging in A/C, turns off and on again with 70mA (no battery), but without video and cooler firing after turning it on the second time (continuous behavior when plugging in A/C ). PL1001 without voltage, everything else ok! There was PU901 oxidation, it was removed, the pads cleaned and re-soldered.
Send Bios attached for analysis.Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Comment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: bios lenovo ideapad 330-15ikb
Hello Peste!
I tried, but with no good results.
I still have no voltage on the PL1001, with a resistance of 7.5ohms. PU 1001 is 2.0V pwm, and according to this datasheet (NCP81253) the output is low, but I don't know if it would be normal on the NM-B452.
In the PL 1002/1003 connected I have 0.853V in both, with a resistance of 0.2 Ohms. Processor heats up normally, but the board always turns on when plugging in the power supply, turns it off and on again keeping 0.77mA and fan at maximum after a few seconds.Comment
-
Re: bios lenovo ideapad 330-15ikb
Hello Peste!
I tried, but with no good results.
I still have no voltage on the PL1001, with a resistance of 7.5ohms. PU 1001 is 2.0V pwm, and according to this datasheet (NCP81253) the output is low, but I don't know if it would be normal on the NM-B452.
In the PL 1002/1003 connected I have 0.853V in both, with a resistance of 0.2 Ohms. Processor heats up normally, but the board always turns on when plugging in the power supply, turns it off and on again keeping 0.77mA and fan at maximum after a few seconds.Attached Files
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Re: bios lenovo ideapad 330-15ikb
hello guys, I am attaching a bios of a lenovo that when turned on after a few seconds goes by turns off again, I have doubts that the bios is the cause but anyway I would appreciate if someone can correct the backup that I attach, thanksAttached FilesComment
-
Re: bios lenovo ideapad 330-15ikb
Attached FilesComment
-
Re: bios lenovo ideapad 330-15ikb
Hello. I have a lenovo ideapad 300-15IKB TYPE:81DE.MB 451 that has been previosuly serviced not too god im afraid
I have tried to use this file:
File Type: zip EG521EG522EZ511EG721NM-B451_REV1-0.zip (5.42 MB, 95 views)
Can someone confirm
1.- original bios chip is W25q64 type?
2.- Is anyone able to upload a clean dump for it?
Regards and thanks in advanceComment
-
Re: bios lenovo ideapad 330-15ikb
Hello. I have a lenovo ideapad 300-15IKB TYPE:81DE.MB 451 that has been previosuly serviced not too god im afraid
I have tried to use this file:
File Type: zip EG521EG522EZ511EG721NM-B451_REV1-0.zip (5.42 MB, 95 views)
Can someone confirm
1.- original bios chip is W25q64 type?
2.- Is anyone able to upload a clean dump for it?
Regards and thanks in advanceComment
-
Re: bios lenovo ideapad 330-15ikb
I used this BIOS and it worked nice, thank you very much!
I have dumped the same bios.bin to 5 laptops ideapad 330 and everyone worked perfect.
How can I barecode the serial number, UUID, Computer Name for each laptop? (in the BIOS it says INVALID to these fields).
Every tool I tried does not work (H2oEZE, H2OSDE, Lenovo manteinance Disk). Is possible to unlock the EEPROM or edit the BIOS file before dumping it to a laptop? I tried UEFITools either but no success.
Thanks in advanceComment
-
Re: bios lenovo ideapad 330-15ikb
I used this BIOS and it worked nice, thank you very much!
I have dumped the same bios.bin to 5 laptops ideapad 330 and everyone worked perfect.
How can I barecode the serial number, UUID, Computer Name for each laptop? (in the BIOS it says INVALID to these fields).
Every tool I tried does not work (H2oEZE, H2OSDE, Lenovo manteinance Disk). Is possible to unlock the EEPROM or edit the BIOS file before dumping it to a laptop? I tried UEFITools either but no success.
Thanks in advanceDue to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: bios lenovo ideapad 330-15ikb
Hello Peste,
Thank you for the response. I'm pretty new on this and I have no clue where is the DMI stored, I have to know the offset or address range to extract that DMI you mention before, right?
Where or how can I find/know the hexadecimal range of the DMI you mention in the BIOS file? I tried but I get lost on that huge amount of hex numbers, I tried to find somethin like "serial", "uuid", but no success at all...
Thank youLast edited by Nordlig; 10-17-2022, 09:16 AM.Comment
-
Re: bios lenovo ideapad 330-15ikb
Hello Peste,
Thank you for the response. I'm pretty new on this and I have no clue where is the DMI stored, I have to know the offset or address range to extract that DMI you mention before, right?
Where or how can I find/know the hexadecimal range of the DMI you mention in the BIOS file? I tried but I get lost on that huge amount of hex numbers, I tried to find somethin like "serial", "uuid", but no success at all...
Thank you
DMI 234000 - 235FFF
on this laptop model the DMI is coded..
enter both bios in the HxD program, search the original bios by the word (LENV), check the box and transfer this interval with (copy-paste) to the other bios...Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
Related Topics
Collapse
-
by mximiliandzGood morning, gentlemen, I hope you can help me with my laptop, I told you that I saved it about 2 years ago because it wouldn't turn on, now I have a ch341a programmer, I made a backup of the bios, I flashed an original downloaded from lenovo and it started, but it turned off after a few minutes, I entered the bios configuration and the brand, model, serial number, windows serial number, etc. did not appear, I request your help, I did everything I found in the forum but I could not solve it, also now it won't start again, it turns on but the fan does not turn, I will share all the information...
-
Channel: BIOS Requests ONLY!
-
-
by jendkkd jejeSo a couple of years ago i got a bios update through Lenovo Vantage, so i installed it and bricked my whole BIOS, so i couldn't fix it so i put that ideapad in a box, 3 years later i found that one PC and want to recover it to switch from a 2014 hp laptop to this one.
I found a method to recover the BIOS of many lenovo laptops tha consists in pluging in a USB Flash with the BIOS files and power on the laptop with Fn + R keys pressed until fans go loud and start beeping loud, but nothing worked, so i think filename is wrong, i tried naming the bios file as 07WW.BIN, BIOS.BIN, BIOS.fd,...10-11-2024, 03:12 PM -
by WahazHello,
I have a Lenovo Thinkbook 15 G2 ITL i5 Laptop (serial number: MP2BFZEF) that when I turn it on, the led on the power button lights up for 5 seconds, then goes out. There's no display and nothing happens.
So I thought it was a Bios problem.
I found 3 bios chips on the board, which I read with a bios programmer: two XMC model bios chips and a Winbond model bios chip. Each XMC model bios chip has two partitions named XM25QH128A [3.3V] and XT25F128A [3.3V]. And the Winbond model bios chip has three partitions named W25Q80BL 3.3V, W25Q80xV 3.3V and W25Q80DV 3.3V....-
Channel: BIOS Requests ONLY!
-
-
by grimacelordHello there.
I am working on a Lenovo Legion T5-26AMR5 desktop that currently has a corrupt BIOS and I have been unsuccessful thus far in trying to fix it myself.
History:
1. This computer came to me initially with an error message that said "BiInitializeLibrary failed 0xc0000001" or "0135 fan error". It would always be one of the two errors. It should be noted that when it produced the fan error, there was no physical problem with the fans. They were all spinning just fine.
I searched for this error online and discovered...-
Channel: BIOS & Schematic Requests!
-
-
by Popel1083Hi,
I want to remove the Bios Password of my Lenovo IdeaPad U330p with the Lenovo autopatcher. I have the CH341A Black and I'm using NeoProgrammer. The Programmer has an LED that indecates when it reads or writes the Chip. When I try to Connect my Programmer to the Bios Chip (Winbond 25Q64FVSIQ) the LED lights up even though I didn't click on Detect botton in NeoProgrammer. If i click on Detect the LED still remains on and NeoProgrammer says "IC not responding".
SN: QB08570065
MB: DA0LZ5MB8D0; REV: D; MODEL J31/N02-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment