---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.​ ----------------------------------------------------------------------------------------------------------------------------------------------------------
Problem deleting bios password on hp elite x2 1012 g2. HELP!!!
Hello everyone, I am new to the world of electronics.
I bought a laptop hp elite x2 1012 g2 with winbond 25Q128JVPQ bios chip with password in bios that I want to delete.
I have bought a CH341A programmer which I am going to modify to 3.3V.
The problem I have is that I have not desoldered the chip and with the tweezers does not read well the chip and returns me empty FF all fields.
The software I am using is asprogramer 2.0.0a14.
I need to be able to read the chip file please!!!!
Hello everyone, I am new to the world of electronics.
I bought a laptop hp elite x2 1012 g2 with winbond 25Q128JVPQ bios chip with password in bios that I want to delete.
I have bought a CH341A programmer which I am going to modify to 3.3V.
The problem I have is that I have not desoldered the chip and with the tweezers does not read well the chip and returns me empty FF all fields.
The software I am using is asprogramer 2.0.0a14.
I need to be able to read the chip file please!!!!
The chip type is WSON8 ,your clip is for SOP8 chips.You will not make good contact with the clip,you will damage the chip.
This is the bin file of my bios, I need to remove the password please!!!! Can someone help me? thank you very much
It's not a good read, try again and use verification. Take two or three dumps from the chip and compare them.
.
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.​ ----------------------------------------------------------------------------------------------------------------------------------------------------------
now I have a problem, I accidentally deleted the chip after the wrong reading as you tell me.
What can I do now?
Try another clean me bios and see if it work.
Or ,write your serial number and somone will built a new bios
I wouldn't advise you to use the clip, most of the time it gives errors.. if you don't have a chip adapter stick wires between the chip and the programmer... don't forget to make a backup copy of the chip before writing..
Or ,write your serial number and somone will built a new bios
I wouldn't advise you to use the clip, most of the time it gives errors.. if you don't have a chip adapter stick wires between the chip and the programmer... don't forget to make a backup copy of the chip before writing..
the serial number of the laptop is 5CG8315GTD, I also attach an image where you can see the characteristics.
Re: Problem deleting bios password on hp elite x2 1012 g2. HELP!!!
hello lapfix.
I tried the bin file that you sent me but now the laptop doesn't do anything, it only lights up the led with yellow light, orange and white light blinking.
Is it possible that the file is invalid? or that the chip has been damaged?
thank you
hello lapfix.
I tried the bin file that you sent me but now the laptop doesn't do anything, it only lights up the led with yellow light, orange and white light blinking.
Is it possible that the file is invalid? or that the chip has been damaged?
thank you
I just built a new bios with your serial and clean me.
try another file with same model...when you have a result just ask to clean me
good afternoon everyone, when desoldering the chip I have noticed a "bubble" that has come out on the board, can anyone tell me what it is?
Thank you very much
Comment