Hi someone can clean bios administrator password please i used hpunlocker.exe but still the password this is my backup
hp probook 430 g5
mainboard : Da0x8bmb6f0 rev :f
thanks
Hi someone can clean bios administrator password please i used hpunlocker.exe but still the password this is my backup
hp probook 430 g5
mainboard : Da0x8bmb6f0 rev :f
thanks
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters. ----------------------------------------------------------------------------------------------------------------------------------------------------------
No way.
Most probably you have an issue with programming of the chip, or it's not properly soldered to the board.
Try again & check carefully all, use verification.
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters. ----------------------------------------------------------------------------------------------------------------------------------------------------------
Hello everyone, my name is Lior Levi and I live in Israel
This is my first time here.
I have HP ProBook 430 G5 2VP86EA and it's BIOS locked with admin password. no way to upgrade it but I'm enable to use the laptop and enter Windows 10. just the bios is locked.
The global manufacturer refuses to help me
The local lab wants to replace a motherboard for twice the price of a laptop.
I disassemble my laptop and removed the main battery and CMOS battery for few days but still the BIOS is locked.
Mother board model: DA0X8BMB6F0 rev F
Wrote on the BIOS chip: Gigadevice HH1742 25B127DSIG AP15471
From google search I saw some chip os programmer on amazon but I don't know nothing about it. I don't know if it can read and write my BIOS chip or not.
I also saw on ebay some chips for my laptop model but it's not mentioned there if the chips match my motherboard model.
And which manufacturer of the chip itself. Should the chip manufacturer and the chip model be the same as the existing chip?
Are there electrical voltages (volts, watts, amperes) that the chip supports?
How do I know if such a chip is suitable for my computer? That will not cause a short circuit.
what can I do? I really need expert help.
thank you.
Re: HP ProBook 430 G5 BIOS locked with admin password
Originally posted by leezhihao2020
How do I know if such a chip is suitable for my computer? That will not cause a short circuit.
what can I do? I really need expert help.
thank you.
You need a programmer or rasberry Pi for dump original bios,To replace a new bios chip, you need to have soldering skills in electronic components, so buy a programmer and dump your bios and post it here, someone will unlock for you is the best. Your bios chip use 3.3 vol VCC. You can use Winbond chip 25Q128FV.. to change Giga chip.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp.Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------
Re: HP ProBook 430 G5 BIOS locked with admin password
Originally posted by hoaca388
You need a programmer or rasberry Pi for dump original bios,To replace a new bios chip, you need to have soldering skills in electronic components, so buy a programmer and dump your bios and post it here, someone will unlock for you is the best. Your bios chip use 3.3 vol VCC. You can use Winbond chip 25Q128FV.. to change Giga chip.
Hello Hoaca388
I ordered BIOS chip from EBAY for my laptop motherboared.
the store wrote to me that I may need to replace also the main EC i/o microcontroller because the password may storage there as well and without replace it, the laptop may ask the password or there will be a error message with flash screen.
I don't know nothing about that. can you or someone else can explain it for me?
I know that there is a BIOS chip with 8 legs. but the main EC i/o microcontroller have so many legs.. what should I do?
HP ProBook 430 G5 2VP86EA , Motherboard DA0X8BMB6F0 rev F
Greetings,
1. I have an HP ProBook 430 G5 2VP86EA laptop
The BIOS is locked with an admin password and I do not remember it
Its BIOS chip model: Gigadevice HH1742 25B127DSIG AP15471 3.3v
I placed an order from the EBAY website for a replacement BIOS chip for the laptop motherboard model: DA0X8BMB6F0 rev F
The store wrote me that the chip model they will send me is: GigaDevice 25Q128CSIG
I want to make sure with you is it possible and electrically safe for the replacement chip model to be compatible with my laptop instead of the current locked BIOS chip?
Beyond that, I do not know if you can explain to me that the computer manufacturer HP refuses to give me support:
Will replacing the BIOS chip remove the password and I can finally enter the BIOS?
Because one of the stores on EBAY wrote to me that it would be necessary to replace the i/o microcontroller EC chip as well, claiming that the password is also stored there and that I would have to use a programmer to do it otherwise there will be an error message and flicker on the screen and and the computer will not work.
I do not understand anything about it.
2. I have technical questions in case the chip I ordered will not be able to remove the administrator password from the BIOS:
What model can a programmer read and write about my BIOS chip model?
I do not have a programmer
But I installed softwares of some programmer models and my BIOS chip model was not supported by these programmers softwares: https://www.alisaler.com/category/so...mers-software/
On top of that my BIOS chip model works with 3.3v and I have not found a programmer that supports it.
I would appreciate if you could explain to me and recommend me a programmer model that supports my chip.
I saw on the Amazon website this model with a wire that connects to the motherboard without having to solder the chip: https://www.amazon.com/gp/product/B07SHSL9X9
But this model does not support my BIOS chip.
Neither in terms of software (chip model does not appear in its software)
and neither in terms of hardware (3.3v)
I would appreciate it and thank you if you can answers my questions and explain to me as much as you can.
Last edited by leezhihao2020; 02-07-2022, 07:11 AM.
Reason: I forgot to ask some questions
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp.Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp.Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------
>Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools
>
python ./main.py "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.BIN" --output-dir "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.txt"
------------------------------------------------...
Hello everyone, I come here to tell you my problem regarding the power-on password. It is not a bios reset demand, and i can't have any access to windows. This is the bios and power-on password that is blocking all other things.
My Omen 15-dh0052nf purchased second-hand was configured with the bios password upon purchase (very simple password :P ).
Having decided to sell it in order to get something more powerful, I reset all BIOS settings and set a blank administrator password. But the power-on password cannot be changed to a blank one so I let the actual password set....
RedmiBook Pro 1542022 6800H
SKU: TM2113-39463
Model Number: RMA2204-AB
CMIIT ID: 2022AP1835
SN: 39463/22WD01355
BIOS version: RMARB5B0P1010 20230628
1. I bought this laptop from flea market, and the seller said that he had never set a password, however here is a password required when pressing F2 to enter BIOS.
2. And after entering incorrrect password 3 times, there is no any useful information like "recovery code"
3. I used universal bios backup tool, and dumped 8MB bin file, but hex code after "SystemSupervisorPw" is...
The batch from which the password was removed works correctly but... after some time, the BIOS password is set again, I reprogrammed the batch with the removed password, it's ok, there is no password, I set my password, ok, I can enter the BIOS with my password but...
Comment