EFIBIN File MacBook Air A1466 (EMC 2632) 820-3437-B
Collapse
X
-
I really appreciate your time, unfortunately it's still the same, I tried to write it with two programmers and the macbook still doesn't turn on, the fan only works for 10 seconds and doesn't give an image,Leave a comment:
-
Here you go with with your serial # & model EMC 2632 & C02NQNWRG085Attached FilesLeave a comment:
-
Hello good day, please could you help me with my old macbook, I tried to clean it myself but the macbook stopped turning on, the fan works for 10 seconds and turns off, there is no image on the screen, and I tried to write many fw that have been uploaded here but none have worked for me, I even created a few new fw editing the serial and the Fsys but it remains the same, there is no image and the fan turns on and off, I have already reset pram many times and nothing, my serial number is C02NQNWRG085, model 1466, emc 2632, my ic is detected as micron N25Q64A, please can you help me? Thank you very muchAttached FilesLeave a comment:
-
try..Attached FilesLeave a comment:
-
-
hi .
Can you clean this for me.macbook air 1466
emc 2632.
Does the file name matters or it is fine with a name a1466.
Thanks in advanceAttached FilesLeave a comment:
-
-
Hi .I couldn't upload bin file.so i will Gdrive link.
please help with password removal for MacBook Air A1466 (EMC 2632)
Thanks in advance.Badcaps Capacitor Search Engine & Electronics Repair ForumLeave a comment:
-
Hi can you help me removing bios password from MacBook Air A1466 (EMC 2632)
and do we need to keep specific name for the bios file?
Leave a comment:
-
-
try..Attached FilesLeave a comment:
-
-
-
Here is my back up... Too slow networrk on my place..
no display dump file
macbook air 1466 820-3437-A
emc 2632Attached FilesLast edited by Marc97; 06-30-2025, 05:12 AM.Leave a comment:
-
-
no the chip is bigger, the contents of the chip are longer than normal....I think you copied it with errors...write the bios from the post above on the original chip...Leave a comment:
-
Looks like the bios chip I have is larger? There is extra space compared to what you sent. Will the mac still read it right or do I need a different chip.Leave a comment:
-
Attached FilesLeave a comment:
Related Topics
Collapse
-
by psdavid65I received a 2013 Macbook Air A1466 820-3437-B motherboard with serial number C02L6GQ9FSV8 that came in WITHOUT a bios chip. I got a new bios chip and reprogrammed it. Macbook now powers on but doesn't boot the SSD. I've flashed a ton of bios but still same problem. Windows installation works with this Macbook but never a mac installation. Unfortunately, since I didn't receive this macbook with a bios chip, I don't have the original bios. What can I do now?...
-
by m1ch43lzmHi everyone
I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
Programmer models: XGecu TL866II Plus / T48 / T56 / T76
Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
There's also an extra OTP Secu.R...-
Channel: BIOS Requests ONLY!
-
-
by echothegamerHello all,
Working on my wife's 13' Macbook air. It's been in a box since she upgraded but I figured it could be good practice.
Details:
Macbook 13' A1466
Board (820-3209-A)
Battery OEM 7.3v 50Wh 6700 mAh (020-7379-A)
Pictures below of Boardview and schematic...
I don't know how to test the voltage on a MacBook battery. I just assumed it had an enable pin but the best I could read was 300 something mV poking around the battery connector.
It's an older model and it is very likely that battery has become... -
by kenzo2I need dump file for nand A2159 512GB with 2 Nand chips >.I upgraded 128gb to 512gb..I use P13 there are only 4Chips...
I need dump file MACBOOK PRO A2159
TSB4232(256)
TSB4229(256)
Thanks​ -
by dbuergiHi all,
i got a A1466 with serious water damage. I was able to clean the whole board and only found a fuse with a coroded trace. Cleaning and resoldering did the job and the macbook started normal but after some time the screen began "flashing" like turning on and off while the Macbook was still running. I checked the board again but was not able to find the problem until now.
Any ideas where to look?... - Loading...
- No more items.
Leave a comment: