Hello, does anyone know where i can download flash image tool ver. 11.0.0.1180 please.
Help me! flash image tool ver 11.0.0.1180
Collapse
X
-
Re: Help me! 11.0.0.1180
Here is a great tutorial: https://winraid.level1techs.com/t/gu...lization/31277
There is a link with files and tools: https://winraid.level1techs.com/t/in...ols-2-15/30719
Scroll down to system tools and pick v11. -
Comment
-
Re: Help me! 11.0.0.1180
Comment
-
Re: Help me! 11.0.0.1180
Put your flash image tool in C:\FIT folder. Your windows username has a character FIT might not like. I had similar problem with FIT.Comment
-
Please Help. I also facing this error with v12, v14, v15. how put flash image tool in C:\FIT Folder. can you explain please.Comment
Related Topics
Collapse
-
by wenl619Intel (R) Modular Flash Image Tool. Version: 18.0.10.2285...
-
by CapThatBrassHi,
Does anyone know of a trusted source from where the FIT tool can be downloaded from? That is the latest version and archived versions if possible.
Thanks -
by apppostolHi all. The program version 16.xxx is very necessary.
Can't find it anywhere. Is it really that rare? Maybe someone has. I will be very very grateful.02-28-2023, 12:12 PM -
by tsavpynDear all,
I forgot my BIOS password of my Surface Pro 3, I searched for solutions for a long time and knew that by using FPT to dump my bios to bin file and using decryptor, I can get my BIOS password.
Now I have a problem that I am unable to dump my BIOS into bin file.
My Surface Pro 3 currently runs on Ubuntu 22.04, with Secure Boot enabled and Boot From SSD Only.
I searched for FPT but there is no Linux version and none of them work.
I hereby request a copy of Intel Flash Programming Tool for Linux x64.
I would really appreciate it if anyone...-
Channel: BIOS Requests ONLY!
-
-
by ekozeko333Hi all,
I’m trying to recover a Lenovo Yoga Slim 7-14ARE05 with board DA0LS3MBAF0 Rev:F. I’ve run into an unusual issue where USB-C PD is stuck at 4.7–5V and the system won’t boot (keyboard lights flash briefly, then nothing).
🔥 The Problem Started After Suspected ESD/PD Fault
I experienced a power issue or ESD event through a USB-C charger
After that, the NX20P5090 power switch was visibly burned and was replaced
Now the PD controller always negotiates 5V @ 2A, even with known-good chargers
🧠 What I’ve Done So Far
Flashed... - Loading...
- No more items.
Comment