Re: HP DMI Tool NBDmiFit
i ran the hp bios update but it didnt help and the laptop still shows the mpm screen
i ran the hp bios update but it didnt help and the laptop still shows the mpm screen
-
-
Re: HP DMI Tool NBDmiFit
ive uploaded my original password locked bios and the unlocked one i flashed (not original)Comment
-
Re: HP DMI Tool NBDmiFit
Use this link or try tool i sure its working
https://www.badcaps.net/forum/showthread.php?t=79956Comment
-
Re: HP DMI Tool NBDmiFit
I have to enter the information on the motherboard in a hp 15-bc014NL notebook made after 2015
I downloaded NbDmiFit_2.10 and even HPDMI I don't know which one to use. About NbDmiFit_2.10
I read that for notebooks after 2012 a pen drive with winPE should be used, it's correct?Comment
-
Re: HP DMI Tool NBDmiFit
First you need MPM unlocked.
But yes, some models need to use NBDmiFit in EFI mode.Comment
-
-
Re: HP DMI Tool NBDmiFit
Thanks you !
It had helped me to put back S/N and P/N for an unsupported old EliteBook 8460p with brand new system board got on eBay from a brocker.Comment
-
Re: HP DMI Tool NBDmiFit
Hello to Everybody! I have an HP Folio 9470m, i've tried everything but nothing works.
It is like you can read the BIOS but you can't change nothing in it.
I've tried your tool (thank You very much), it says "successfull" but when i reboot nothing change. What can i do? thank you very much for your help!Comment
-
Re: HP DMI Tool NBDmiFit
Hi guys, i have a Probook 4330s which posts with missing serial and product information. I've made an USB dos stick and tried almost every NBDmiFit available in this thread, but after running NBDmiFit and choosing the program option and entering the product number, it errors saying: Failed to write SKI, Failed to write model name. Can anyone point me in the right direction? ThanksComment
-
Re: HP DMI Tool NBDmiFit
typo: SKI = SKUComment
-
Comment
-
Comment
-
Re: HP DMI Tool NBDmiFit
Thanks for the reply imranromi, can we PM?Comment
-
Re: HP DMI Tool NBDmiFit
Hello,
Im new here and i have found this site through searching for an answer. I was wondering if anyone here would happen to have the hp dmi tool 2.15. its for an elite book 840 g4 or if another version would work as well. Thanks in advance for the helpComment
-
HP DMI Tool is used to Extract DMI information from a HP BIOS Bin.
DISCLAIMER: badcaps.net and its members do not support unlocking stolen or company-owned devices.
The DMI Tool given here are for personal use only.
************************************************** ***********************************************
DISCLAIMER: THE HP DMI Tool IS FREE AND ARE INTENDED FOR EDUCATIONAL PURPOSES ONLY.
You CAN download it, use it.use it.I only ask that you DON'T modify it ,sell it or try to make a profit
from it, and that you please credit the author... -
Dear all,
I forgot my BIOS password of my Surface Pro 3, I searched for solutions for a long time and knew that by using FPT to dump my bios to bin file and using decryptor, I can get my BIOS password.
Now I have a problem that I am unable to dump my BIOS into bin file.
My Surface Pro 3 currently runs on Ubuntu 22.04, with Secure Boot enabled and Boot From SSD Only.
I searched for FPT but there is no Linux version and none of them work.
I hereby request a copy of Intel Flash Programming Tool for Linux x64.
I would really appreciate it if anyone... -
Hi guys i like to buy tool that automatic unlock bios or find password also can flash and repair bios ic, looking for good tool have good software that have 1 click and unlock bios any recommend good tool? looking for sony ps5 and and laptop bios
Thanks -
Epson M3170 Monochrome inkjet printer adjustment program tool.
Hi, i want to reset a epson reset program tool needed to reset the EPSON M3170 PRINTER's Maintenance box,
anyone having it, please share
Thank you -
HI all,
I am working on some boards where all 100+ SMD caps have to be replaced (yes, they actually went bad!). I found a workflow to remove them comfortably (two irons, pre-heater and extra hot air for larger ones on ground planes).
When it comes to soldering them back, I add solder to one pad and then I use a plastic tweezer to keep them in the right place while I solder that leg.
The tweezer works - but I was wondering if there is a more "dedicated" tool or whether someone has a better idea. If it was for a bunch of caps then who cares. But because...
Comment