Hi friends I need a working bios for this model the problem with this is boot loop iteration.can anyone share a working bios for this model please
-
-
Re: Samsung np450r4e bios needed
Old bios -
Re: Samsung np450r4e bios needed
ok thanks the board id: BA41-02244A attached is the original that has a bootloop iteration problem. can someone share a working bios for this model pleaseComment
-
Re: Samsung np450r4e bios needed
Anyone please helpComment
-
Re: Samsung np450r4e bios needed
anyone please help share a working bios for this, I have found on the net on vinafix but i dont have an account
https://***********/threads/np450r5v...45/#post-15284Comment
-
Re: Samsung np450r4e bios needed
anyone please share a working bios for thisComment
-
Re: Samsung np450r4e bios needed
anyone please helpComment
-
Re: Samsung np450r4e bios needed
anyone please help on thisComment
-
Re: Samsung np450r4e bios needed
anyone who has a working bios for this please shareComment
-
Re: Samsung np450r4e bios needed
I cannot find free dumps for this model can someone who has a working back up for this model please shareComment
-
Re: Samsung np450r4e bios needed
Problem solved I buy a account on vinafix site here i share in this forum so that others can used itComment
-
Re: Samsung np450r4e bios needed
thank you... i did not have itIm Back... sort of...
Comment
-
Re: Samsung np450r4e bios needed
welcome alaborbeComment
-
Re: Samsung np450r4e bios needed
thanks bro...Comment
-
Re: Samsung np450r4e bios needed
Thanks broComment
-
-
After installing Linux, I can no longer enter the BIOS of my Samsung Series 9 (NP900X3C) laptop. When pressing [F2] during boot I simply get a black screen. Same thing when pressing [F10] and choosing "Setup" from the "App Menu" tab. Apparently this is a relatively common issue with Samsung laptops of that generation, but unfortunately i haven't been able to resolve the issue (yet).
Things i've tried so far; reinstalled Windows 10, checked for redundant boot entries, tried to factory reset using the emergency keyhole, attempted to clear the NVRAM by physically...08-01-2025, 09:15 AM -
Sublect line continuation: ... Jaguar IDS PC aka Panasonic
>Read BIOS guides, methods, resources and tools
>
Ack
>Try the method at BIOS guides, methods, resources and tools before requesting help
>
Ack
>Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools
>
python ./main.py "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.BIN" --output-dir "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.txt"
------------------------------------------------... -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
helio freinds someone should help me with this bios
samsung -NT110S1J-K14WS
s/n = 0GAJ91AFC00432K
board no. LIBERO-11
BA41-02396A
i attached the backup...
Comment