Hello To everyone
I would appreciate it if someone could remove the password from this original file.
Thanks in advance
bios dump elitebook 840 g3
Collapse
X
-
RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting
You MUST:- Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
-
PLEASS HELP ME TO UNLOCK MY BIOS
hereAttached FilesLeave a comment:
-
Attached FilesLeave a comment:
-
corrupted dump power on and off
840 g3 6050A2892401-MB-A01
5CG7235G5J
1DX46UP AP
Attached FilesLeave a comment:
-
-
Hi guys, need help with cleaning this bios dump.
Thanks in advance!
Attached FilesLeave a comment:
-
read thhe rules..https://www.badcaps.net/forum/troubl...before-posting
post the S/N, the original bios of the laptop, the motherboard model, the full name and model of the laptop,
etc.
Leave a comment:
-
-
-
MY laptop powers ON but do not display, i have replace different Rams but do not work.
Please HELP ME CLEAN MY Bios File
HP Elitebook 840 g3
ProdID V1H24UT#ABA
SN# 5CG6502ZLZAttached FilesLeave a comment:
-
-
-
Attached FilesLeave a comment:
-
840 G3 ProductID: Z0H86EC#ABB
SN# 5CG7254JDY
I need universal 840 G3 bios file, the laoptop brought to me to repair it and the first technician has tampered the bios chip, have tried my best, still blinking bios errorLeave a comment:
-
Leave a comment:
-
Attached FilesLast edited by jackx; 07-24-2024, 11:25 AM.Leave a comment:
Related Topics
Collapse
-
by Habble7The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...-
Channel: Troubleshooting Computer Displays
-
-
by DynaxSCHi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
by mediadoctorCan you help me upload Bios dump from HP EliteBook 845 G8 with AMD CPU and Touchscreen please 🤝
-
Channel: BIOS Requests ONLY!
-
-
by GuestHello,
I have an EliteBook 850 G5. After a Windows update, including a BIOS update, the notebook turns on, but the screen remains black, and the fans spin at high speed—nothing else happens.
I assume the BIOS update failed, so I searched for the BIOS chip.
I found a Winbond chip located between the RAM and the hard drive, which has a size of 32 MB.
However, the BIOS update available on HP's website is only 17 MB in size. I used the update version that was previously installed when the notebook was still working.
Can the corrupted...-
Channel: BIOS Requests ONLY!
-
-
by MDSIHello,
I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.
Details:
Model : HP OMEN 17-an012nf
Motherboard Part Number : DAG3BAMBAF0 REV : F
Serial Number (S/N) : 5CD7280D51
BIOS chip : Winbond W25Q64VSIQ
Programmer : EZP2023+
Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.
I already...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Leave a comment: