hi everyone can someone share a working bios for this model please i have attached the original file laptop turn on but no display already tried change cpu ,memory and reflow nvidia chip still there is no display
-
-
Re: samsung rc410 bios needed
anyone can fix my dump please or share a working bios for this model please -
Re: samsung rc410 bios needed
anyone please helpComment
-
Re: samsung rc410 bios needed
anyone please help fix my dump please laptop no displayComment
-
Re: samsung rc410 bios needed
ba-??????Comment
-
Re: samsung rc410 bios needed
board code model:JINMAO-L REV 1.0(101125)-4Comment
-
Re: samsung rc410 bios needed
Original working dump. Enjoy my friend.
If you are still not getting display, not a bios issue for sure.Comment
-
Re: samsung rc410 bios needed
thank you i will try this and give feedbackComment
-
Re: samsung rc410 bios needed
i already tried to flash the bios but still the same issue no display i also noticed nvidia chip is cold could it be dead?Comment
-
Re: samsung rc410 bios needed
does anyone have a schematic for this please shareComment
-
Re: samsung rc410 bios needed
anyone have a schematic on this pleaseComment
-
Re: samsung rc410 bios needed
i also need the diagram for this samsung rc410Comment
-
Re: samsung rc410 bios needed
thank you so muchComment
-
After installing Linux, I can no longer enter the BIOS of my Samsung Series 9 (NP900X3C) laptop. When pressing [F2] during boot I simply get a black screen. Same thing when pressing [F10] and choosing "Setup" from the "App Menu" tab. Apparently this is a relatively common issue with Samsung laptops of that generation, but unfortunately i haven't been able to resolve the issue (yet).
Things i've tried so far; reinstalled Windows 10, checked for redundant boot entries, tried to factory reset using the emergency keyhole, attempted to clear the NVRAM by physically...08-01-2025, 09:15 AM -
Sublect line continuation: ... Jaguar IDS PC aka Panasonic
>Read BIOS guides, methods, resources and tools
>
Ack
>Try the method at BIOS guides, methods, resources and tools before requesting help
>
Ack
>Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools
>
python ./main.py "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.BIN" --output-dir "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.txt"
------------------------------------------------... -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
helio freinds someone should help me with this bios
samsung -NT110S1J-K14WS
s/n = 0GAJ91AFC00432K
board no. LIBERO-11
BA41-02396A
i attached the backup...
Comment