Hello everyone,
i have laptop Hp Probook 640 G2 I7-6600u motherboard is 6050A2723701-MB-A02 i have flashed bios with this one in topic .
my lopatop is started but i have message "machine is not in committed state" and serial number and product is not correct
i want solution for this problem please.
Thanks
-
Leave a comment:
-
-
Ohhh! My bad, I'm truly very sorry to have broken a cardinal forum rule. I offer my apologies to everyone and particularly to SMDFlea. Reading the rules is a must. Thanks for pointing it out to me.
HP 650 G2
CIRCUS-6050A2723701-MB-A02
SN: 5CG71822PHLeave a comment:
-
Serial number ? It must be typed,not as part of the filename https://www.badcaps.net/forum/troubl...before-posting -
Hello everyone, I have a Hp probook 650 G2 that is working well, problem is, it switches on the fan when the laptop have been shutdown. This will run till the battery drains. I have tried flashing with BIOS downloaded from here but it doesn't display anything.
When i "borrow" BIOS from a similar motherboard, it doesnt power, or when it powers, no display.
Attached is the original bios dump. Any help is welcome.
PS: I'm trying to find time to read about BIOS ME etc, between my workshop hours, hoping to succeed.Leave a comment:
-
-
Thanks! Board is still not working, it probably has other problems. When I plug in the power adapter it idles at 0.015A and briefly jumps to 0.200A when pressing the power button but it goes down again immediately. Keeping the power button pressed heats up an IC which is likely the 3.3V LDO. Should I replace the IC or does it indicate a problem with the EC or PCH?
Leave a comment:
-
Can someone please take a look at this bios? The board does not power on at all but voltages are present (19V/5V/3.3V/1.8V).
I already tried to put together a fresh bios with the existing ME but it did not solve the problem so I guess I must have done it wrong.
HP 650 G2
6050A2723701-MB-A02
SN: 5CG6451VRL
Leave a comment:
-
Schematic/Boardview requests go in a seperate forum,this section is for Bios requests ONLY. Read the bios request posting rules please !
RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting -
HP ProBook 640 G2 original bios dump and boardview needed, can anyone helpLeave a comment:
-
Read the rules before posting
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/showthread.php?t=103570
You MUST:- Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://badcaps.net/forum/showthread.php?t=88758 )
-
-
Hp Probook 450 G7 s# SCD0348W35 had a locked BIOS. Bought BIOS and EC chips off Ebay that were supposed to match this machine - the 450 G7. Flashed in the BIOS on chip i bought using a CH341. BIOS unlocked next boot. Some error to contact HP. Entered BIOS and reset to system defaults and rebooted. Machine worked fine but every cold boot the contact HP message popped and everything else worked as fine. Assumed the error was from EC chip not matching BIOS that i just flashed in. So i flashed in the EC that was supposed to match from the EBay chip i bought and instant brick.
Ive got...07-08-2025, 09:24 PM -
Hello everyone, I am looking for help as I am struggling to remove lost BIOS Admin password on an HP EliteDesk G6 800 series desktop. I wanted to reset the vPro remote control IP kvm for homelab use.
Here is the hardware identification specs:
HP EliteDesk 800 G6 Desktop Mini PC
Intel(R) Core(TM) i5-10500 CPU @ 3.10GHZ 16384 MB RAM
BIOS ver S21 Ver. 02.05.01 01/05/2021
Born on date: 07/26/2021
SN MXL11841GN
SKU 3X8V9UCHABA
UUID 8116E79EF6FFE94DB0B98A3188270C5C
SYSTEM BOARD ID 8710
SYSTEM BOARD CT NUKBER PJLHQ0A8JF236L... -
Dear All,
Hope that this post is at the right place of the forum.
I am seeking help and technical advice to remove bios admin password from HP ProBook 4520s.
The laptop is operating normally and, I am not facing any major issue with it except; the bios admin password that I found about by coincidence only few weeks back.
As the laptop is operating normally, I am reluctant to take it to a workshop to de-solder the bios chip in order to read it by an external programmer, as I am not an expert in doing such a thing.
After... -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...
Leave a comment: