Re: I need bios dump for Microsoft Surface 4
Hi, i found the problem and Solution.
I read my BIOS with ch341a v 1.18 and get it Verified.
But while reading and verifieng process it get same erorr message and this message is now stored in the BIOS dump.
In the latest file what you send me (11.6.25.1229_outimage) check it from
FFDD50 to the end. So BIOS Region is Bad. (In another bios dumps are offsets differt... i have to check whole BIOS Region)
I downloaded any Dump for Surface Pro 4 what i can found in web.
Than i found BIOS what look identical to my original and Replaced it whit FIT.
The BIOS was from a diferent board (x911788-008 i5 4GB 128GB) my (x911788-009 i5 8GB 256GB).
But it Works.
At First Start i got yollow stripe over surface logo. But it boot whitout problems to Windows. After firmware update the stripe is gone.
After this i run FPTW -greset --> that kills Windows (Bootloop).
Recovery mode helps! So windows running again.
Now ME Firmware Works... (V 11.8.70.3626)
But Touch Firmware is Bad... (V 1.51.250.106.104.239)
So i have to flash it again.
Many of BIOS Dumps for SP4 which i downloaded from hire and web have the same Problem like my.
Only AS Programmer 1.40 get in my case correct dump. (W25Q128FVPQ)
I will get feedback this weekend after flashing touch firmware.
Sorry again for my English
Originally posted by peste
View Post
I read my BIOS with ch341a v 1.18 and get it Verified.
But while reading and verifieng process it get same erorr message and this message is now stored in the BIOS dump.
In the latest file what you send me (11.6.25.1229_outimage) check it from
FFDD50 to the end. So BIOS Region is Bad. (In another bios dumps are offsets differt... i have to check whole BIOS Region)
I downloaded any Dump for Surface Pro 4 what i can found in web.
Than i found BIOS what look identical to my original and Replaced it whit FIT.
The BIOS was from a diferent board (x911788-008 i5 4GB 128GB) my (x911788-009 i5 8GB 256GB).
But it Works.
At First Start i got yollow stripe over surface logo. But it boot whitout problems to Windows. After firmware update the stripe is gone.
After this i run FPTW -greset --> that kills Windows (Bootloop).
Recovery mode helps! So windows running again.
Now ME Firmware Works... (V 11.8.70.3626)
But Touch Firmware is Bad... (V 1.51.250.106.104.239)
So i have to flash it again.
Many of BIOS Dumps for SP4 which i downloaded from hire and web have the same Problem like my.
Only AS Programmer 1.40 get in my case correct dump. (W25Q128FVPQ)
I will get feedback this weekend after flashing touch firmware.
Sorry again for my English

Comment