Hi guys,
Need bios dump for HP G56-107sa
Motherboard DAAX3MB16A1 REV.A
INTEL CPU, DDR2 RAM
Thank you!
Need bios dump for HP G56-107sa
Motherboard DAAX3MB16A1 REV.A
INTEL CPU, DDR2 RAM
Thank you!
-
-
Re: HP G56 Bios dump needed
Hi
Try this
-
Re: HP G56 Bios dump needed
i have this one from hp website.
However my programmer EZP2011 is saying ''file too long'' when i load it.
anyway i have flashed like this but is no power at all. With the original bios was turning on with black screen
i can confirm is a 2Mb bios but not this one.
ThanksComment
-
Re: HP G56 Bios dump needed
Tr this
Comment
-
Re: HP G56 Bios dump needed
Hi
Try this
Comment
-
Re: HP G56 Bios dump needed
post your old bios pls
is yout board
DAAX3MB16A1
or
DA0AX3MB16A1
????Last edited by ala_borbe; 05-06-2017, 05:01 AM.Im Back... sort of...Comment
-
Re: HP G56 Bios dump needed
the board is DAAX3MB16A1 REV.A.
can confirm ahmad.qralh's bios is working .
The board has another problem i will look for schematic .
Mosfet PQ39 shorted, mosfet on the left of PQ39 totally burned and broken traces.
will try to identify them and restore traces.
schematic is here:
If anyone has board view please
ThanksLast edited by claudyu07; 05-06-2017, 05:17 AM.Comment
-
Re: HP G56 Bios dump needed
pq39 resistance between pins 5,6,7,8 and ground only 9-10 ohms?
is this correct?Comment
-
-
Re: HP G56 Bios dump needed
Thanks. everything looks ok but don't understand if the resistance should be that low between pins 5,6,7,8 and ground only 9-10 ohms on PQ39?
ThanksComment
-
Re: HP G56 Bios dump needed
Thank you!Comment
-
Re: HP G56 Bios dump needed
Thank you!Comment
-
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
Hi everyone,
I'm trying to recover a Fujitsu Lifebook E5513 (most likely 2023 model) that was bricked during a BIOS update. The update was interrupted (probably due to power loss), and now the laptop is stuck in a boot loop showing "PBB rollback" / "SBB rollback" messages.
BIOS access (F2) and Boot Menu (F12) are no longer possible – the system instantly reboots after the rollback messages.
I extracted the official BIOS update package from Fujitsu (contains FJNB2FD.CAP, ~18.7 MB) and tried tools like UEFIExtract, but it seems to only contain... -
I have this laptop that does boot but it's on an older BIOS that has issues with Secure Boot, and I cannot use the normal Razer BIOS updater because for some reason the serial number is missing / got deleted somehow (Common issue on this model, from what I've read). I got a dump of the BIOS chip (or at least what I think is the BIOS chip), and its 16MB in size - the files from the Razer BIOS update are 8MB. (There's two 8MB files, am I supposed to combine these somehow? Or combine with an Intel ME firmware? I have no idea).
So, I'm looking for a BIOS dump for this machine - a 16MB one.... -
Hello,
I badly need bios dump for HP DM1-4000er,
Model: HP DM1-4000er
Motherboard: DA0NM9MB6D0 REV.D
Product: QJ490EA#ACB
Please help. My bios chip burned so I don't have the old bios anymore. I need bios dump before I can install the replacement. -
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would...
Comment