Macbook pro a1502 Password

[sassan]

Hello,

i have a macbook pro A1502 whenever it boots it says "your computer is disabled.try again in 60 minutes"

and when i try to boot it in recovery using command+R it request a password.

the motherboard number is 820-3476-A ,it has 25Q064A CHIP.

can i read this chip using the minipro and remove the password.

Thank you.

[kesmeseker]

Re: Macbook pro a1502 Password

Use backup first. 2 bios working. 2. bios turkish.

http://dosya.co/p89b7t5bvw0x/820-3476-a.7z.html

[sassan]

Re: Macbook pro a1502 Password

Thank you,but how can i read the chip 25Q064A using minipro.is there a special adapter for it?

[Pascal Komlassan]

Re: Macbook pro a1502 Password

Use backup first. 2 bios working. 2. bios turkish.

http://dosya.co/p89b7t5bvw0x/820-3476-a.7z.html

Thank you bro.very good

[ibrahim11]

Re: Macbook pro a1502 Password

Hello
How can i read bios chip for apple A1466,A1502 etc using minipro tl866, rt809f, svod,.is there a special adapter for it?

[ibrahim11]

Re: Macbook pro a1502 Password

Hello
How can i read bios chip for apple A1466,A1502 etc using minipro tl866, rt809f, svod,.is there a special adapter for it?

please help me

[RAR1991]

Re: Macbook pro a1502 Password

of curse the MiniPro is capable to read the 25Q064A but you have to use a DIP8 adapter to solder the chip on it.

[ibrahim11]

Re: Macbook pro a1502 Password

of curse the MiniPro is capable to read the 25Q064A but you have to use a DIP8 adapter to solder the chip on it.

i know this and i have it

but i want to read it without chip desolder form motherboard

[ictc]

Re: Macbook pro a1502 Password

You should buy an adapter that fits the connector on the motherboard. There is a company on internet that sells that part and also a variant of the same system that contains also the password clean bios. That cost a lot and I consider it a must if you do many of this repairs otherwise I suggest to desolder the chip and connect wires to it and connect those to the mini pro.

[ibrahim11]

Re: Macbook pro a1502 Password

You should buy an adapter that fits the connector on the motherboard. There is a company on internet that sells that part and also a variant of the same system that contains also the password clean bios. That cost a lot and I consider it a must if you do many of this repairs otherwise I suggest to desolder the chip and connect wires to it and connect those to the mini pro.

can you tell me this company to buy the adapter