bios please DA0MTBMB8E0 REV E

[samanthban]

DA0MTBMB8E0 REV E Toshiba c40d-a

please share if you have bios dump.

[meritosari]

Re: bios please DA0MTBMB8E0 REV E

https://www.badcaps.net/forum/showpo...9&postcount=45

[samanthban]

Re: bios please DA0MTBMB8E0 REV E

https://www.badcaps.net/forum/showpo...9&postcount=45

Thanks meritosari...let you know

[samanthban]

Re: bios please DA0MTBMB8E0 REV E

Thanks meritosari...let you know

bios flash done but same issue exist

[meritosari]

Re: bios please DA0MTBMB8E0 REV E

bios flash done but same issue exist

this from official toshiba, if you want to try again

[samanthban]

Re: bios please DA0MTBMB8E0 REV E

this from official toshiba, if you want to try again

your so helpful will give another try

[highpulse]

Re: bios please DA0MTBMB8E0 REV E

eheh , you mention issue still persist. witch is really the problem ??

[samanthban]

Re: bios please DA0MTBMB8E0 REV E

eheh , you mention issue still persist. witch is really the problem ??

its no display one assuming that is a bios fault dramrest ok

[samanthban]

Re: bios please DA0MTBMB8E0 REV E

I have the lapotp hp 15-r15nu and i have RT809F Serial ISP Programmer but when i want to program the ENE kb9012 i have some errors

Please help me

thank you

I am not using this
.

[highpulse]

Re: bios please DA0MTBMB8E0 REV E

samanthban , ok , let go by parts:
Do you have a powerlab source , for you can see the consume of the machine while you turning it on ? , if so let us know the overall amp consume.
second i assume you made the basic despit things , like cheking rams , screen , etc !
third , once you open the machine , chek all phases (coils) and see if you got voltages present once you start the machine

[samanthban]

Re: bios please DA0MTBMB8E0 REV E

samanthban , ok , let go by parts:
Do you have a powerlab source , for you can see the consume of the machine while you turning it on ? , if so let us know the overall amp consume.
second i assume you made the basic despit things , like cheking rams , screen , etc !
third , once you open the machine , chek all phases (coils) and see if you got voltages present once you start the machine

1st -its fluctuating between 2 to 3 volts and later it will remain at 1.25 to 1.65 I think its normal

2nd - already checked

3rd -not done as you said ,I will do that as well.

Thanks for your suggestion, appreciate

[susze78]

Re: bios please DA0MTBMB8E0 REV E

I NEED THE da0mtbmb8e0 REV E please help me

[sem molina]

Re: bios please DA0MTBMB8E0 REV E

this from official toshiba, if you want to try again

Functions perfect on AMD

[Chaminda4191]

Re: bios please DA0MTBMB8E0 REV E

this from official toshiba, if you want to try again

its works well (AMD) ,Thank you Bro