Re: aclu1/aclu2 nm-a271 bios dump urgent 
Thanks a lot bajno
Thanks a lot bajno
-
-
Re: aclu1/aclu2 nm-a271 bios dump urgent
thank yoooooooouComment
-
Re: aclu1/aclu2 nm-a271 bios dump urgent
Teşekkürler. Thank youComment
-
Re: aclu1/aclu2 nm-a271 bios dump urgent
Thank you very much. Screen flashing solved and laptop working.Comment
-
Re: aclu1/aclu2 nm-a271 bios dump urgent
thankComment
-
Last edited by hoaca388; 03-17-2022, 06:17 PM.↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
hello, i need help. i have a mainboard on going repair. problem is no lcd display even connected to external monitor. all coil voltages present at the very moment i connected the charger. fan already spinning automatically. power on button board was already removed for isolation but still problem exists. power button reinstalled to confirm if it can shutdown the spinning fan, yes it can put off and on the fan and power led LED1 but still no display. if i press and hold power button it will shutdown but if i removed the charger ( board was removed from chassis. ) the power led1 will lit up and...11-26-2025, 10:41 PM
-
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.
I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"?
Comment