HP 6735s dead after bios upgrade

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • DS-1
    Senior Member
    • Jun 2015
    • 82
    • Italy
    #1

    HP 6735s dead after bios upgrade

    Hi guys!

    I have this 6735s that I upgraded from Vista to 7. I had the problem that I can't regulate brightness in Windows 7. Searching in the net, I've found that the problem was the outdated bios. I downloaded the last 2.1 bios release of this bios and did the upgrade thru FreeDOS (using ROMpaq.exe). The operation went to the end without problems.

    Maybe I did the mistake to reboot the PC with ctrl alt del and not shutting it down from the button. The PC restarted with black screen. After a couple of minutes, I shutted it down from the button and tried to turn it on again. From that moment, I only obtain AC adapter orange light blinking (with blue always on), while I only put the jack in and nothing more happens. No button or light works.

    Now I believe I have a BIOS corrupted in my PC. How can I try to reprogram it?

    Thanks in advance for the reply.
    Tags: None
    • dspok
      Badcaps Veteran
      • Jan 2014
      • 553
      • Nepal
      #2
      Re: HP 6735s dead after bios upgrade

      yes, BIOS is corrupt.

      someone is able to recover corrupt BIOS using BIOS Crisis Recovery using USB. See below link.
      http://www.systutorials.com/3022/hp-...bios-flashing/

      or you can use EEPROM Programmer and flash attached BIOS file.
      Attached Files

        Comment

        • DS-1
          Senior Member
          • Jun 2015
          • 82
          • Italy
          #3
          Re: HP 6735s dead after bios upgrade

          Originally posted by dspok
          yes, BIOS is corrupt.

          someone is able to recover corrupt BIOS using BIOS Crisis Recovery using USB. See below link.
          http://www.systutorials.com/3022/hp-...bios-flashing/

          or you can use EEPROM Programmer and flash attached BIOS file.
          Thanks for the reply, dspok!

          Unfortunately I can't use Crisis Recovery mode, because my 6735s won't boot at all. When I press the power button, nothing happens!

          Should I desolder the BIOS to re-program it? Can you tell me what programmer should I buy for this operation? Is there any diy programmer to assemble?

          What BIOS chip 6735s has?
          Last edited by DS-1; 06-24-2015, 04:50 AM.

            Comment

            • dspok
              Badcaps Veteran
              • Jan 2014
              • 553
              • Nepal
              #4
              Re: HP 6735s dead after bios upgrade

              @DS-1
              you can use any universal EEPROM Programmer but for this job done I use Top2011.

              see on ebay.
              http://www.ebay.com/bhp/eprom-programmer

                Comment

                • DS-1
                  Senior Member
                  • Jun 2015
                  • 82
                  • Italy
                  #5
                  Re: HP 6735s dead after bios upgrade

                  I'm from Italy, so I'm checking into the italian eBay page.

                  Is something like this good for this job?

                  http://www.ebay.it/itm/CH341A-24-25-...item51bc3fde34

                    Comment

                    • dspok
                      Badcaps Veteran
                      • Jan 2014
                      • 553
                      • Nepal
                      #6
                      Re: HP 6735s dead after bios upgrade

                      Originally posted by DS-1
                      I'm from Italy, so I'm checking into the italian eBay page.

                      Is something like this good for this job?

                      http://www.ebay.it/itm/CH341A-24-25-...item51bc3fde34
                      It may work but I'm not sure.

                        Comment

                        • DS-1
                          Senior Member
                          • Jun 2015
                          • 82
                          • Italy
                          #7
                          Re: HP 6735s dead after bios upgrade

                          Do you know what BIOS chip 6735s has? I will look for a programmer that can be used for that kind of chip.

                            Comment

                            • dspok
                              Badcaps Veteran
                              • Jan 2014
                              • 553
                              • Nepal
                              #8
                              Re: HP 6735s dead after bios upgrade

                              Originally posted by DS-1
                              Do you know what BIOS chip 6735s has? I will look for a programmer that can be used for that kind of chip.
                              as per schematic 6735s have SST25VF016B chip.
                              is your laptop AMD version?

                                Comment

                                • DS-1
                                  Senior Member
                                  • Jun 2015
                                  • 82
                                  • Italy
                                  #9
                                  Re: HP 6735s dead after bios upgrade

                                  Originally posted by dspok
                                  as per schematic 6735s have SST25VF016B chip.
                                  is your laptop AMD version?
                                  Yes, my 6735s has Sempron AMD processor and ATI 3200HD graphic card.

                                    Comment

                                    • DS-1
                                      Senior Member
                                      • Jun 2015
                                      • 82
                                      • Italy
                                      #10
                                      Re: HP 6735s dead after bios upgrade

                                      I've found this, too. It's from China. Is it that hard to desolder the BIOS from the motherboard?

                                      http://www.ebay.it/itm/EZP2010-High-...item2eb96ace7a

                                        Comment

                                        • sopik78
                                          Badcaps Veteran
                                          • Nov 2013
                                          • 517
                                          • Czech Republic
                                          #11
                                          Re: HP 6735s dead after bios upgrade

                                          The EZP2010 is sufficient. I recommend to buy a set of socket adapters for easy change SPI chips.
                                          The best way to desolder the chip is to use a hot air gun.

                                            Comment

                                            • ktmmotocross
                                              Boardkiller
                                              • Feb 2014
                                              • 3597
                                              • slovakia
                                              #12
                                              Re: HP 6735s dead after bios upgrade

                                              or u can buuy clip to program on board

                                                Comment

                                                • dj_ricoh
                                                  Badcaps Legend
                                                  • Jan 2013
                                                  • 2073
                                                  • uk
                                                  #13
                                                  Re: HP 6735s dead after bios upgrade

                                                  Originally posted by ktmmotocross
                                                  or u can buuy clip to program on board
                                                  It does not work.
                                                  I try and almost fry my usb where the programmer was.

                                                  He try to power the board trough usb lol.
                                                  Desolder read write solder it back and thats it.

                                                  I got clip because i dont wanna solder on adapter. So yee

                                                  I was thinking to try to read with notebook.on via a usb hub with psu.
                                                  Just cook it! It's already broken.

                                                    Comment

                                                    • DS-1
                                                      Senior Member
                                                      • Jun 2015
                                                      • 82
                                                      • Italy
                                                      #14
                                                      Re: HP 6735s dead after bios upgrade

                                                      Originally posted by sopik78
                                                      The EZP2010 is sufficient. I recommend to buy a set of socket adapters for easy change SPI chips.
                                                      The best way to desolder the chip is to use a hot air gun.
                                                      http://www.ebay.it/itm/291300736180?...%3AMEBIDX%3AIT

                                                      Can this work for what I need? It is cheaper.

                                                      Both programmers I've linked seems to have adapter to be used with SST25VF016B.
                                                      Last edited by DS-1; 06-25-2015, 05:30 AM.

                                                        Comment

                                                        Previous template Next

                                                        Related Topics

                                                        Collapse
                                                        • Loli Popu
                                                          DELL 5590 LAPTOP DEAD AFTER BIOS WRONG FLASHED
                                                          by Loli Popu
                                                          Hello guys ,i have a dell latitude 5590 with f411p bios,this laptop has bios password ,i tried to read the bios(winbond 25q128jv) with ch341 but when goes to verify give error ,it said doesnt match .After this i flashed another bios which is cleaned and then the laptop was dead ,i tried to turn on but only white light in the buton power turned on several times and then no display at all .I had a backup and flashed again the original bios ,but this time the laptop will not turn on at all ,no light nothing,the bios original bios that i flashed was having verify error when i verified with ch341 ,i...
                                                          12-13-2024, 03:28 AM
                                                        • Vesko356
                                                          [Guide] How to find the right HP bios version to flash
                                                          by Vesko356
                                                          First of all thanks to all of our members who have posted previously all methods posted here.
                                                          Please leave a comment if you find something new,or have anything else to add.
                                                          -----------------------------------------------------------------------------------------

                                                          Find by serial number,model number or series

                                                          If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
                                                          Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
                                                          Operating system and OS version.If...
                                                          08-11-2023, 03:27 AM
                                                        • tranquility
                                                          Asus X515KA not booting. after flashing bios sometimes i come there. but then dead again
                                                          by tranquility
                                                          hallo,

                                                          i have an asus X515KA-EJ058W here.
                                                          just both leds white...he battery blinking without battery connected

                                                          consuming ~400mA and tries to start but nothing happens but fan spinning if cpu gets warm
                                                          if i hold the power button it shuts down and consumes ~30mA i cant spot anything getting warm with thermal....the ec/sio a liiiitle but this is maybe normal beacause it is working ?
                                                          power on again is possible but again 400mA then and no picture.

                                                          now the really strange
                                                          i flashed bios (some version i found on the internet) and resoldered....sometimes...
                                                          12-11-2024, 06:47 AM
                                                        • jbonavita
                                                          ASUS TP500LA BIOS request/repair/merge?
                                                          by jbonavita
                                                          Hi, my laptop wont boot at all
                                                          With original bios no POST, only LED lights
                                                          With alternative BIOS from model TP500LN (flashed via programmer) the notebook works again
                                                          Some issues
                                                          A- with bios from 500LN, it won't update from bios of model 500LA (from 500LN v203 to 500LA v300)
                                                          B- If updated from 500LN version 203 to 300, the battery stops being recognized

                                                          Things I tried

                                                          1- Update / clear ME: Took the non working bios, made a backup, and did this: https://www.badcaps.net/forum/troubl...theory/trouble...
                                                          04-29-2025, 09:38 PM
                                                        • zenius
                                                          [REQUEST] Dell G3 3579 BIOS Password & AMI Protected Range/BIOS Guard Unlock
                                                          by zenius
                                                          Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.

                                                          Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...
                                                          12-08-2024, 06:13 AM
                                                        • Loading...
                                                        • No more items.
                                                        Working...