Hello there, Hp 15-d025ee has no display. so i need program bios. if anyone have this i request help me. i attachaced orginal dump here.
PN: 010194Q00-491-G
PN: 010194Q00-491-G
-
-
Re: Hp 15-d025ee bios need, urgent please
Give mobo code -
Re: Hp 15-d025ee bios need, urgent please
thanks for reply.
motherboard code is
010194Q00-491-GLast edited by nazrul145; 10-19-2014, 02:59 AM.Comment
-
Re: Hp 15-d025ee bios need, urgent please
From hp site:Comment
-
Re: Hp 15-d025ee bios need, urgent please
Thanks Khaahk, I will check and lets u knowComment
-
Re: Hp 15-d025ee bios need, urgent please
ThanksComment
-
Re: Hp 15-d025ee bios need, urgent please
if someone needs to know, nazrul145´s backup works. I have the same PN: 010194Q00-491-G .anyway my laptop is 14" displayComment
-
Re: Hp 15-d025ee bios need, urgent please
Sorry for hacking the thread but my problem is somehow related.There is this HP 15-d054sq, with board number 010194q00-491-g.The laptop does not power on,wifi key lights and capslock blinks slowly .There for must be a bios issue.So I backed up the old bios from main ic and flashed already many variants found even here.But this bios has tho parts main+kbc. I cannot found backup for kbc.And the official bios files extracted are joined together.Somebody can split encripted EFI bios files?Or backup file from KBC ic?Thanks in advance.Comment
-
Re: Hp 15-d025ee bios need, urgent please
i need 01019b600-491-g biosComment
-
Comment
-
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hello engineers 😀,
I’m kindly requesting a clean and unlocked BIOS dump for the following HP laptop, as it’s bricked after flashing SP152727. The system now keeps rebooting, and the original issue was an Administrator / Power-On Password that I can no longer access.😏
🔧 Device Info:
- Model: HP 15-da2007ne
- Product Number: 8XF55EA#ABV
- Serial Number: CND0338P0D
- CPU: Intel Celeron N4000
- EC/BIOS Chip: [Add chip number from the motherboard or BIOS chip]
💀 Problem:😅
- Device shows “Administrator Password”... -
Hi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70... -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
Hello,
I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.
Details:
Model : HP OMEN 17-an012nf
Motherboard Part Number : DAG3BAMBAF0 REV : F
Serial Number (S/N) : 5CD7280D51
BIOS chip : Winbond W25Q64VSIQ
Programmer : EZP2023+
Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.
I already...
Comment